Open Access
Issue
JNWPU
Volume 38, Number 4, August 2020
Page(s) 897 - 903
DOI https://doi.org/10.1051/jnwpu/20203840897
Published online 06 October 2020
  1. LITVIN F L, FUENTES A. Gear Geometry and Applied Theory[M]. New York: Cambridge University Press, 2004 [CrossRef] [Google Scholar]
  2. LITVIN F L. Computerized Design, Simulation of Meshing, and Contact and Stress Analysis of Face-Milled Formate Generated Spiral Bevel Gears[J]. Mechanism and Machine Theory, 2002, 37 (5): 441– 459 [Article] [CrossRef] [Google Scholar]
  3. FANG Zongde, LIU Tao, DENG Xiaozhong. Tooth Contact Analysis of Spiral Bevel Gears Based on the Design of Transmission Error[J]. Acta Aeronautica et Astronautica Sinica, 2002, 23 (3): 226– 230 [Article] (in Chinese) [Google Scholar]
  4. CAO Xuemei, ZHANG Hua, FANG Zongde. Design and Analysis of Laoded Transmission Errors for Aviation Spiral Bevel Gears[J]. Journal of Aerospace Power, 2009, 24 (11): 2618– 2624 [Article] (in Chinese) [Google Scholar]
  5. CAO Xuemei, FANG Zongde, XU Hao. Function-Oriented Active Tooth Surface Design of Spiral Bevel Gears and Experimental Tests[J]. Chinese Journal of Mechanical Engineering, 2008, 44 (7): 209– 214 [Article] (in Chinese) [Google Scholar]
  6. TANG Jinyuan, Lu Yanfeng, ZHOU Chao. Research on Improved Tooth Contact Analysis Algorithm of Spiral Bevel Gears[J]. Journal of Aerospace Power, 2009, 24 (1): 189– 195 [Article] (in Chinese) [Google Scholar]
  7. CAO Xuemei, YANG Bohui, DENG Xiaozhong. Novel Decomposition Methodology for Tooth Contact Analysis and Experiment Tests[J]. Journal of Mechanical Engineering, 2018, 54 (5): 47– 52 [Article] (in Chinese) [Google Scholar]
  8. HERMANN J S. What "Ease-off" Shows about Bevel and Hypoid Gears[J]. Gear Technology, 2001, (9/10): 18– 23 [Article] [Google Scholar]
  9. CHEN Shuhan, YAN Hongzhi, MING Xingzu, et al. Difference Surface Model Establishment and Simulation in Spiral Bevel Gear[J]. Journal of System Simulation, 2009, 21 (11): 3430– 3433 [Article] (in Chinese) [Google Scholar]
  10. CAO Xuemei, DENG Xiaozhong, NIE Shaowu. Ease-Off Flank Topography Design for Aviation Spiral Bevel Gears with Higher-Order Transmission Errors by Modification of Conjugate[J]. Journal of Aerospace Power, 2015, 30 (1): 195– 200 [Article] (in Chinese) [Google Scholar]
  11. CAO Xuemei, SUN Ning, DENG Xiaozhong. Design for Straight Bevel Gear Based on Low Installation Error Sensitivity and Experiment Tests[J]. Journal of Aerospace Power, 2016, 31 (1): 227– 232 [Article] (in Chinese) [Google Scholar]
  12. WEI Bingyang, DENG Xiaozhong, TONG Angxin, et al. Surface Synthesis Method on Generating Parameters Computation of Spiral Bevel-Gears[J]. Journal of Mechanical Engineering, 2016, 52 (1): 20– 25 [Article] (in Chinese) [Google Scholar]
  13. WEI Bingyang, YANG Jianjun, TONG Angxin. Tooth Meshing Simulation and Analysis Based on Isometric Mapping Ease-Off Surface[J]. Journal of Aerospace Power, 2017, 32 (5): 1259– 1265 [Article] (in Chinese) [Google Scholar]
  14. JIANG Jinke, FANG Zongde, SU Jinzhan. Design and Grinding for Modified Helical Gears with a Higher-Order Transmission Error[J]. Journal of Harbin Institute of Technology, 2014, 46 (9): 43– 49 [Article] (in Chinese) [Google Scholar]
  15. ZHANG Yu, Yan Hongzhi, Zeng Tao, et al. Influence Regularity of Helical Movement and Cutter Parameters on the Generated Tooth Surface Characteristic of Duplex Helical Method[J]. Journal of Mechanical Engineering, 2018, 54 (5): 53– 61 [Article] (in Chinese) [CrossRef] [Google Scholar]
  16. JIANG Jinke, FANG Zongde, JIA Haitao. Research on Design and CNC Grinding Machine for Diagonal Modified Helical Gearxy1 Journal of Mechanical Engineering, 2014, 50 (19): 158– 165 [Article] (in Chinese) [CrossRef] [Google Scholar]
  17. Stadtfeld H J. The Ultimate Motion Graph[J]. ASM E J of Mechanical Design, 2000, 122 (3): 317– 322 [CrossRef] [Google Scholar]
  18. WEI Bingyang, FANG Zongde, ZHOU Yanwei, et al. On Improving Design of Spiral Bevel Gear with Higher-Order Transmission Error Curvexy1 Journal of Northwestern Polytechnical University, 2003, 21 (6): 757– 760 [Article] (in Chinese) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.