Study on sensitivity analysis of tooth surface roughness parameters and contact stress
JNWPU, 40 4 (2022) 883-891
Published online: 2022-09-30
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Research on the correlation between roughness parameters and lubrication characteristics of gear tooth surfaces based on thermoellastoplastic hydrodynamic lubrication
Jiling Chen, Xin Li, Jinyuan Tang, Liangliang Lv, Wen Shao, Shengyu You and Zhaoyang TianInternational Communications in Heat and Mass Transfer 172 110606 (2026)
https://doi.org/10.1016/j.icheatmasstransfer.2026.110606
Optimization of Grinding Process Parameters for Gear Steel to Enhance the Abbott–Firestone Curve Bearing Capacity under the Expected Surface Roughness Sa Constraints
Jiling Chen, Xin Li, Jinyuan Tang, Liangliang Lv, Xu Tian, Wen Shao and Zhengyu ShiTribology Transactions 1 (2026)
https://doi.org/10.1080/10402004.2026.2623821
Statistical correlation neural network for small sample data and its engineering application: Predicting maximum mises stress on ultrasonic-assisted grinding surfaces
Jiling Chen, Xin Li, Jinyuan Tang, Tiancheng Li, Wen Shao and Yuqin WenMeasurement 253 117823 (2025)
https://doi.org/10.1016/j.measurement.2025.117823
Tooth surface error correction method of hypoid gear based on Morris–LM (Levenberg–Marquard) fusion algorithm
Jun Li, Zhonghou Wang, Mingzhi Chen, Chongyue Yuan, Zhenglong Gou and Yunlong WuThe International Journal of Advanced Manufacturing Technology 139 (3-4) 1291 (2025)
https://doi.org/10.1007/s00170-025-15821-3
Small modulus gears modeling and tooth contact simulation based on measured point cloud
Jiajing Guo, Xin Jin, Yanshun Lu, Zhuoqi Cui, Chenyang Wang, Yongqiang Song, Hao Wu and Muzheng XiaoJournal of Physics: Conference Series 3078 (1) 012027 (2025)
https://doi.org/10.1088/1742-6596/3078/1/012027
A novel method for accurate manufacturing of roughness parameter Sa in ultrasonic-assisted grinding—machine learning, genetic algorithm and TOPSIS integration
Ding Zhang, Jiling Chen, Xin Li, Jinyuan Tang, Zhengyu Shi and Wen ShaoSurface Topography: Metrology and Properties 13 (4) 045005 (2025)
https://doi.org/10.1088/2051-672X/ae1247
A New Numerical Simulation Method for 3D Rough Surface Topography of Shot Peening Parts with Specified 3D Roughness Spatial Parameters
Jiling Chen, Jinyuan Tang, Wen Shao, Xin Li, Jiuyue Zhao, Wei Zhou and Ding ZhangTribology Letters 72 (4) (2024)
https://doi.org/10.1007/s11249-024-01921-w
A new numerical simulation method of 3D rough surface topography with coupling 3D roughness parameters Sdr, Sdq, Spd, Spc, and characteristic functions
Jiling Chen, Jinyuan Tang, Wen Shao, Xin Li, Duo Yang, Bo Zhao and Hongtao DongTribology International 200 110117 (2024)
https://doi.org/10.1016/j.triboint.2024.110117
Numerical simulation method for three-dimensional rough surface of vibratory polishing parts
Jiling Chen, Jinyuan Tang, Wen Shao, Zhou Sun, Hao Zhang, Xin Li and Bo ZhaoTribology International 193 109417 (2024)
https://doi.org/10.1016/j.triboint.2024.109417
(2024)
https://doi.org/10.21203/rs.3.rs-4897626/v1
An Integrated Design Method for Used Product Remanufacturing Process Based on Multi-Objective Optimization Model
Chao Ke, Yanxiang Chen, Muyang Gan, Yang Liu and Qunjing JiProcesses 12 (3) 518 (2024)
https://doi.org/10.3390/pr12030518
A Fuzzy Decision-Making Method for Green Design for Remanufacturability
Yu Cai, Chao Ke and Qunjing JiProcesses 12 (5) 911 (2024)
https://doi.org/10.3390/pr12050911
Rough surface modeling and contact analysis based on micro-scale spherical roller bearing
Ming Chen, Qiang Bian, Guang Zeng, Chunjiang Zhao, Lianyun Jiang, Xiangyun Zhang and Bowen JiaoJournal of the Brazilian Society of Mechanical Sciences and Engineering 45 (12) (2023)
https://doi.org/10.1007/s40430-023-04530-1
An Intelligent Design Method for Remanufacturing Considering Remanufacturability and Carbon Emissions
Peng Peng, Chao Ke and Jun HanProcesses 11 (12) 3359 (2023)
https://doi.org/10.3390/pr11123359