Open Access
Issue |
JNWPU
Volume 40, Number 1, February 2022
|
|
---|---|---|
Page(s) | 175 - 181 | |
DOI | https://doi.org/10.1051/jnwpu/20224010175 | |
Published online | 02 May 2022 |
- Kumar S, Barai S V. Concrete fracture models and applications[M]. Berlin: Springer Berlin Heidelberg, 2011 [CrossRef] [Google Scholar]
- Li Min. Effects of rate-dependent properties of material on dynamic properties of reinforced concrete structural[J]. Dalian: Dalian University of Technology, 2012 (in Chinese) [Google Scholar]
- Swartz S E, Taha N M. Mixed mode crack propagation and fracture in concrete[J]. Engineering Fracture Mechanics, 1990, 35(1/2/3): 137–144 [Article] [CrossRef] [Google Scholar]
- Cho C G, Hotta H. A study on compressive strength of concrete in flexural regions of reinforced concrete beams using finite element analysis[J]. Structural Engineering & Mechanics, 2002, 13(3) : 313–328 [CrossRef] [Google Scholar]
- Barenblatt G I. The formation of equilibrium cracks during brittle fracture. General ideas and hypotheses. Axially-symmetric cracks[J]. Journal of Applied Mathematics and Mechanics, 1959, 23(3) : 434–444 [Google Scholar]
- Dugdale D S. Yielding of steel sheets containing slits[J]. Journal of Mechanics Physics of Solids, 1960, 8(2) : 100–104. [Article] [NASA ADS] [CrossRef] [Google Scholar]
- Hillerborg A, Modeer M, Petersson P E. Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements[J]. Cement & Concrete Research, 1976, 6(6) : 773–781 [Article] [CrossRef] [Google Scholar]
- Yu R C, Ruiz G. Explicit finite element modeling of static crack propagation in reinforced concrete[J]. International Journal of Fracture, 2006, 141(3/4) : 357–372 [Article] [CrossRef] [Google Scholar]
- Billy C. Simulation of crack growth using cohesive crack method[J]. Applied Mathematical Modelling, 2010, 34(9) : 2508–2519. [Article] [CrossRef] [Google Scholar]
- Carpinteri A, El-Khatieb M, Cadamuro E. Failure mode transitions in RC beams: a cohesive/overlapping crack model application[J]. Meccanica, 2013, 48(10) : 2349–2366. [Article] [CrossRef] [Google Scholar]
- Carpinteri A, Cadamuro E, Ventura G. Fiber-reinforced concrete in flexure: a cohesive/overlapping crack model application[J]. Materials & Structures, 2015, 48(1/2) : 235–247 [Article] [CrossRef] [Google Scholar]
- Chang Xin, Ren Mingfu, Guo Xu. A cohesive zone model for self-similar fractal crack propagation[J]. Journal of Mechanical Science & Technology, 2017, 31 : 4763–4769 [Article] [CrossRef] [Google Scholar]
- Wu J, Ru C Q. A modified cohesive zone model for a high-speed expanding crack[J]. Fatigue & Fracture of Engineering Materials & Structures, 2014, 37(9) : 1013–1024 [Article] [CrossRef] [Google Scholar]
- Andreas B, Stephan R, Meinhard K. Cohesive zone modeling of stable crack propagation in highly ductile steel[J]. Key Engineering Materials, 2018, 774 : 167–172. [Article] [CrossRef] [Google Scholar]
- Vecchio F J, Shim W. Experimental and analytical reexamination of classic concrete beam tests[J]. Journal of Structural Engineering, 2004, 130(3) : 460–469. [Article] [CrossRef] [Google Scholar]
- Bresler B, Scordelis A C. Shear strength of reinforced concrete beams[J]. ACI Structural Journal, 1963, 111(4) : 809–818 [Google Scholar]
- Guo L, Xiang J, Latham J P, et al. A numerical investigation of mesh sensitivity for a new three-dimensional fracture model within the combined finite-discrete element method[J]. Engineering Fracture Mechanics, 2016, 151 : 70–91. [Article] [CrossRef] [Google Scholar]
- Zhang Juanxia, Tang Chun'an, Liang Zhengzhao, et al. Numerical simulation of failure process of reinforced concrete specimen under uniaxial tension[J]. Chinese Journal of Computational Mechanics, 2007 (4) : 453–458. 10.3969/j.issn.1007-4708.2007.04.013 (in Chinese) [Google Scholar]
- Shatarat N, Katkhuda H, Abdel-Jaber M, et al. Experimental investigation of reinforced concrete beams with spiral reinforcement in shear[J]. Construction & Building Materials, 2016, 125: 585–594 [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.