Open Access
Volume 41, Number 5, Octobre 2023
Page(s) 978 - 986
Published online 11 December 2023
  1. LIANG Peng, LI Xingyang. Influence of sea wave shock on transient start-up performance of water-lubricated bearing[J]. Tribology International, 2022, 167: 1–14 [Google Scholar]
  2. CHEN Shouan, XIANG Guo, FILLON Michel, et al. On the tribo-dynamic behaviors during start-up of water lubricated bearing considering imperfect journal[J]. Tribology International, 2022, 174: 1–16 [Google Scholar]
  3. LI Hulin, YIN Zhongwei. A study on wear behavior of tin-based journal bearing under different working conditions[J]. Industrial Lubrication and Tribology, 2020, 72(3): 359–368 [Google Scholar]
  4. CUI Shuhui, GU Le, FILLON Michel, et al. The effects of surface roughness on the transient characteristics of hydrodynamic cylindrical bearings during startup[J]. Tribology International, 2018, 128: 421–428. [Article] [CrossRef] [Google Scholar]
  5. SUN Jun, GUI Changlin. Hydrodynamic lubrication analysis of journal bearing considering misalignment caused by shaft deformation[J]. Tribology International, 2004, 37: 841–848. [Article] [CrossRef] [Google Scholar]
  6. SUN Jun, GUI Changlin, LI Zhiyuan. Experimental research for effect of journal misalignment on performances of journal bearing[J]. Chinese Journal of Mechanical Engineering, 2006, 42(7): 159–163. [Article] (in Chinese) [CrossRef] [Google Scholar]
  7. SANDER D E, ALLMAIER A, PRIEBSCH H H. Simulation of journal bearing friction in severe mixed lubrication-validation and effect of surface smoothing due to running-in[J]. Tribology International, 2016, 96: 193–183 [Google Scholar]
  8. LI Biao, SUN Jun, ZHU Shaoyu, et al. Influence of the axial movement of misaligned journal on lubrication performance of journal bearing with rough surface[J]. Chinese Journal of Mechanical Engineering, 2019, 55(21): 88–97. [Article] (in Chinese) [Google Scholar]
  9. DENG Mei. Thermoelastohydrodynamic analysis of misaligned plain journal bearing with rough surface[D]. Hefei: Hefei University of Technology, 2008 (in Chinese) [Google Scholar]
  10. WANG Zhigang, LIANG Xingyu. An investigation on sliding bearings thermoelastohydrodynamic lubrication performance of ice based on micro convex body contact theory[J]. Lubrication Engineering, 2014, 39(3): 33–37. [Article] (in Chinese) [Google Scholar]
  11. HUANG Ping. Lubrication numerical calculation methods[M]. Beijing: Higher Education Press, 2012: 113–116 (in Chinese) [Google Scholar]
  12. XIANG Guo, HAN Yanfeng, WANG Jiaxu, et al. Coupling transient mixed lubrication and wear for journal bearing modeling[J]. Tribology International, 2019, 138: 1–15. [Article] [CrossRef] [Google Scholar]
  13. TIAN Xiaolong, WANG Wen, FU Weiping, et al. Contact stiffness model of mechanical joint surfaces considering the asperity interactions[J]. Chinese Journal of Mechanical Engineering, 2017, 53(17): 149–159. [Article] (in Chinese) [CrossRef] [Google Scholar]
  14. MUZAKKIR S M, LIJESH K P, HIRANI H. Tribological failure analysis of a heavily-loaded slow speed hybrid journal bearing[J]. Engineering Failure Analysis, 2014, 40(40): 97–113 [CrossRef] [Google Scholar]
  15. LI Yuansheng, AO Liangbo, LI Lei, et al. Dynamic analysis method of dynamic character coefficient of hydrodynamic journal bearing[J]. Chinese Journal of Mechanical Engineering, 2010, 46(21): 48–53. [Article] (in Chinese) [Google Scholar]
  16. ANDHARIA P I, GUPTA J L, DEHERI G M. Effect of surface roughness on hydrodynamic lubrication of slider bearings[J]. Tribology Transactions, 2008, 44(2): 291–297 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.