Open Access
Issue |
JNWPU
Volume 37, Number 4, August 2019
|
|
---|---|---|
Page(s) | 767 - 773 | |
DOI | https://doi.org/10.1051/jnwpu/20193740767 | |
Published online | 23 September 2019 |
- Qiu F, Bu K, Song J H, et al. Dimensional Control of Nickel-Based Single Crystal Turbine Blade Investment Casting by Process Control Optimization[J]. International Journal of Metalcasting, 2018, 12(3): 469–479 [Article] [CrossRef] [Google Scholar]
- Lin Xiaojun, Guo Yan, Wu Guang, et al. CMM Measuring Data Processing Algorithms for Blades about the Contour Measurment[J]. Chinese Journal of Scientific Instrument, 2013, 34(11): 2442–2450 [Article] (In chinese) [Google Scholar]
- Lee G, Mou J, Shen Y. Sampling Strategy Design for Dimensional Measurement of Geometric Features Using Coordinate Measuring Machine[J]. International Journal of Machine Tools & Manufacture, 1997, 37(7): 917–934 [Article] [CrossRef] [Google Scholar]
- He Gaiyun, Ji Caixia, Guo Longzhen, et al. Analysis of Measurement Method Error in Freeform Surface Based on Equal Moment Strategy[J]. Journal of Tianjin University, 2016, 49(2): 128–133 [Article] (In chinese) [Google Scholar]
- Li S Z. Adaotive Sampling and Mesh Generation[J]. Computer-Aided Design, 1995, 27(3): 235–240 [Article] [CrossRef] [Google Scholar]
- He G Y, Jia H Y, Guo L Z, et al. Adaptive Sampling Strategy for Free-Form Surface Based on CAD Model[J]. Automatic Manufacturing Systems, 2012, 1(2): 541–544 [Article] [Google Scholar]
- Yu M R, Zhang Y J, Li Y L, et al. Adaptive Sampling Method for Inspection Planning on CMM for Free-Form Surfaces[J]. International Journal of Advanced Manufacturing Technology, 2013, 67(9/10/11/12): 1967–1975 [Article] [CrossRef] [Google Scholar]
- Ainsworth I, Ristic M, Brujic D. CAD-Based Measurement Path Planning for Free-Form Shapes Using Contact Probes[J]. International Journal of Advanced Manufacturing Technology, 2000, 16(1): 23–31 [Article] [CrossRef] [Google Scholar]
- Ren M J, Kong L B, Sun L J, et al. A Curve Network Sampling Strategy for Measurement of Freeform Surfaces on Coordinate Measuring Machines[J]. IEEE Trans on Instrumentation and Measurement, 2017, 66(11): 3032–3043 [Article] [CrossRef] [Google Scholar]
- Obeidat S M, Raman S. An Intelligent Sampling Method for Inspecting Free-Form Surfaces[J]. International Journal of Advanced Manufacturing Technology, 2009, 40(11/12): 1125–1136 [Article] [CrossRef] [Google Scholar]
- Rajamohan G, Shunmugam M S, Samuel G L. Practical Measurement Stratigies for Verification of Freeform Surfaces Using Coordinate Measuring Machines[J]. Metrology and Measurement Systems, 2011, 18(2): 209–222 [CrossRef] [Google Scholar]
- Elkott D F, Veldhuis S C. Isoparametric Line Sampling for the Inspection Planning of Sculptured Surfaces[J]. Computer-Aided Design, 2005, 37(2): 189–200 [Article] [CrossRef] [Google Scholar]
- Elkott D F, Elmaraghy H A, Elmaraghy W H. Automatic Sampling for CMM Inspection Planning of Free-Form Surfaces[J]. International Journal of Production Research, 2002, 40(11): 2653–2676 [Article] [CrossRef] [Google Scholar]
- Gong Yuling, Ping Xueliang, Zhou Baozhen, et al. Planning and Simulation of CMM Measuring Path Based on Vector Resemble Selection Algorithm[J]. Tool Engineering, 2008(1): 114–118 [Article] (In chinese) [Google Scholar]
- Zhou Baozhen. Study on Measuring Method of Surface and Measuring Simulation[D]. Wuxi, Jiangnan University, 2008 (In chinese) [Google Scholar]
- Pan Jinchuan. Research on Planning and Simulation of CMM Measuring the Integral Impeller[D]. Nanjing, Nanjing University of Aeronautics and Astronautics, 2014 (In chinese) [Google Scholar]
- Jiang R S, Wang W H, Zhang D H, et al. A Practical Sampling Method for Profile Measurement of Complex Blades[J]. Measurement, 2016, 81: 57–65 [Article] [CrossRef] [Google Scholar]
- Cheng Yunong, Zhu Zhenzhen, Li Weiliang, et al. Measurement Sampling Method Oriented to Blade Bending and Torsion Deformation Analysis[J]. Computer Integrated Manufacturing Systems, 2013, 19(6): 1329–1335 [Article] (In chinese) [Google Scholar]
- Koini G N, Sarakinos S S, Nikolos I K. A Software Tool for Parametric Design of Turbomachinery Blades[J]. Advances in Engineering Software, 2009, 40(1): 41–51 [Article] [CrossRef] [Google Scholar]
- Chen Zhiqiang. Research of Cross-Sectional Feature Parameter Extraction of Blade Based on Measurement Data[D]. Xi'an, Northwestern Polytechnical University, 2007 (In chinese) [Google Scholar]
- Zhang Dan, Zhang Weihong, Wan Min, et al. Reversing Design Methodology of the Die Profile in Investment Casting Based on the Simulation of Displacement Field and Identification of Featured Parameters[J]. ACTA Aeronautica et Astronautica Sinica, 2006, 27(3): 509–514 [Article] (In chinese) [Google Scholar]
- Zhang Xiandong, Bu Kun, Cheng Yunyong, et al. Research on CMM-Based Measuring Points Sampling and Distribution Method of Blades[J]. Forging & Stamping Technology, 2012, 37(4): 131–135 [Article] (In chinese) [Google Scholar]
- Pagani L, Scott P J. Curvature Based Sampling of Curves and Surfaces[J]. Computer Aided Geometric Design, 2018, 59: 32–48 [Article] [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.