Open Access
Volume 37, Number 4, August 2019
Page(s) 774 - 784
Published online 23 September 2019
  1. Ebert F. Fundamentals of Design and Technology of Rolling Element Bearings[J]. Chinese Journal of Aeronautics, 2010, 23(1): 123–136 [Article] [CrossRef] [Google Scholar]
  2. Ebert F. An Overview of Performance Characteristics, Experiences and Trends of Aerospace Engine Bearings Technologies[J]. Chinese Journal of Aeronautics, 2007, 20(4): 378–384 [Article] [CrossRef] [Google Scholar]
  3. Harris T A. Rolling Bearing Analysis[M]. New York, Taylor & Francis Group, 1999 [Google Scholar]
  4. Tada S. Three-Dimensional Analysis of Non-Repeatable Runout(NRRO) in Ball Bearing[J]. KOYO Engineering Journal, 2002, 161E: 31–37 [Google Scholar]
  5. Yuan Xing, Zhu Yongsheng, Hong Jun, et al. Prediction Model of Spindle Dynamic Characteristics Affected by Non-Repetitive Run-Out of Precision Ball Bearing and Its Application[J]. Journal of Jilin University, 2012(2): 382–387 [Article] (In chinese) [Google Scholar]
  6. Jang G H, Kim D K, Han J H. Characterization of NRRO in a HDD Spindle System Due to Ball Bearing Excitation[J]. IEEE Trans on Magnetics, 2001, 37(2): 815–819 [Article] [NASA ADS] [CrossRef] [Google Scholar]
  7. Noguchi S, Ono K. Reduction of NRRO in Ball Bearings for HDD Spindle Motors[J]. Precision Engineering, 2004, 28(4): 409–418 [Article] [CrossRef] [Google Scholar]
  8. Noguchi J, Hiruma K, Kawa H. The Influence of Location of Balls and Ball Diameter Difference in Rolling Bearings on the Non-Repetitive Runout(NRRO) of Retainer Revolution[J]. Precision Engineering, 2005, 29(1): 11–18 [CrossRef] [Google Scholar]
  9. Noguchi S, Hiruma K. Theoretical Analysis of the NRRO of the Components of Retainer Rotation in Consideration of Diameter Difference and Disposition of Balls in a Ball Bearing[J]. Japanses Journal of Tribology, 2003, 48(2): 167–176 [Article] [Google Scholar]
  10. Noguchi S, Hiruma K. Experimental Analysis of the NRRD of the Components of Retainer Rotation in Consideration of Disposition of Balls in a Ball Bearing[J]. Japanses Journal of Tribology, 2003, 48(4): 405–413 [Google Scholar]
  11. Noguchi S, Obinata S. Influence of the Unequal Orbital Intervals of Balls on the NRRO of Rotational Frequency of the Cage in a Ball Bearing[J]. Japanese Journal of Tribology, 2005, 50(1): 77–85 [Article] [Google Scholar]
  12. Noguchi S, Noguchi S, Tanaka K, et al. Theoretical Analysis of a Ball Bearing Used in HDD Spindle Motors for Reduction of NRRO[J]. IEEE Trans on Magnetics, 1999, 35(2): 845–850 [Article] [NASA ADS] [CrossRef] [Google Scholar]
  13. Ma Fangbo, Ji Peng, Li Zhengmei, et al. Impact of Roller Diameter Error on Mechanical Performance of Spherical Roller Bearings under Combined Loading[J]. Chinese Journal of Construction Machinery, 2015, 13(2): 114–119 [Article] (In chinese) [Google Scholar]
  14. Okamoto J, Ohmori T, Kitahara T. Study on Run-Out of Ball Bearings-Relation Between Unroundness of Race and Locus of Shaft in Rotation[J]. Japanese Journal of Tribology, 2001, 46(7): 578–584 [Article] [Google Scholar]
  15. Gunhee Jang, Seoiig-Weon Jeong. Vibration Analysis of a Rotating System due to the Effect of Ball Bearing Waviness[J]. Journal of Sound and Vibration, 2004, 269(3/4/5): 709–726 [Article] [NASA ADS] [CrossRef] [Google Scholar]
  16. Xu L, Li Y. Modeling of a Deep-Groove Ball Bearing with Waviness Defects in Planar Multibody System[J]. Multibody System Dynamics, 2015, 33(3): 229–258 [Article] [CrossRef] [Google Scholar]
  17. Kankar P K, Sharma S C, Harsha S P. Vibration Based Performance Prediction of Ball Bearings Caused by Localized Defects[J]. Nonlinear Dynamics, 2012, 69(3): 847–875 [Article] [CrossRef] [Google Scholar]
  18. Patel U A, Upadhyay S H. Theoretical Model to Predict the Effect of Localized Defect on Dynamic Behavior of Cylindrical Roller Bearing at Inner Race and Outer Race[J]. Journal of Multi-Body Dynamics, 2014, 228(2): 152–171 [Article] [Google Scholar]
  19. Wang F, Jing M, Yi J, et al. Dynamic Modelling for Vibration Analysis of a Cylindrical Roller Bearing Due to Localized Defects on Raceways[J]. Journal of Multi-Body Dynamics, 2015, 229(1): 39–64 [Article] [NASA ADS] [Google Scholar]
  20. Chen G, Wang B, Mao F. Effects of Raceway Roundness and Roller Diameter Errors on Clearance and Runout of a Cylindrical Roller Bearing[J]. Journal of Engineering Tribology, 2013, 227(3): 275–285 [Article] [Google Scholar]
  21. Chen Guanci, Mao Fanhai, Wang Baokun. Effects of Off-Sized Cylindrical Rollers on the Static Load Distribution in a Cylinder Roller Bearing[J]. Journal of Engineering Tribology, 2012, 226(8): 687–696 [Article] [Google Scholar]
  22. Bhateja C P, Pine R D. The Rotational Accuracy Characteristics of the Preloaded Hollow Roller[J]. Journal of Lubrication Technology, 1981, 103(1): 6–12 [Google Scholar]
  23. Yu Yongjian, Li Jishun, Chen Guoding, et al. Rotational Accuracy of the Cylindrical Roller Bearing Based on Inner Raceway Profile[J]. Journal of Aerospace Power, 2017, 32(1): 155–161 [Article] (In chinese) [Google Scholar]
  24. Song Fei, Li Jishun, Liu Yonggang. Influence of Raceway Roundness Error on Running Accuracy of Cylindrical Roller Bearings[J]. Bearing, 2011(5): 1–4 [Article] (In chinese) [Google Scholar]
  25. Yu Yongjian, Li Jishun, Chen Guoding, et al. Numerical Calculation and Experimental Research of Rotational Accuracy on Cylindrical Roller Bearing[J]. Journal of Mechanical Engineering, 2016, 52(15): 65–72 [Article] (In chinese) [Google Scholar]
  26. Shi Wenxiang, Li Jishun, Liu Yonggang. Forecast and Simulation of Rotational Accuracy of Cylindrical Roller Bearing[J]. Mechanical Science and Technology for Aerospace Engineering, 2011, 45(11): 72–78 [Article] (In chinese) [Google Scholar]
  27. Wang Hongjun. Testing Technology of the Rolling Bearing[M]. Beijing, China Machine Press, 2008 (In chinese) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.