EDP Sciences logo
Submit your paper
Search
Menu
All issues Volume 38 / No 3 (June 2020) JNWPU, 38 3 (2020) 596-603 References
Open Access
Issue
JNWPU
Volume 38, Number 3, June 2020
Page(s) 596 - 603
DOI https://doi.org/10.1051/jnwpu/20203830596
Published online 06 August 2020
  1. Li J, Li F, Ma X, et al. Effect of Grain Boundary Characteristic on Intergranular Corrosion And Mechanical Properties of Severely Sheared Al-Zn-Mg-Cu Alloy[J]. Materials Science & Engineering A, 2018, 732: 53– 62 [Article] [CrossRef] [Google Scholar]
  2. Zuo J, Hou L, Shi J, et al. Effect of Deformation Induced Precipitation on Dynamic Aging Process and Improvement of Mechanical/Corrosion Properties AA7055 Aluminum Alloy[J]. Journal of Alloys and Compounds, 2017, 708: 1131– 1140 [Article] [CrossRef] [Google Scholar]
  3. ÖZER G, Karaaslan A. Properties of AA7075 Aluminum Alloy in Aging and Retrogression and Reaging Process[J]. Chinese Journal of Nonferrous Metals, 2017, 27: 2357– 2362 [Article] [CrossRef] [Google Scholar]
  4. Chen Wen. Application of Advanced Aluminum Alloy on A380[J]. Aviation Maintenance and Engineering, 2005 (2): 40– 41 [Article](in Chinese) [Google Scholar]
  5. Wen K, Fan Y, Wang G, et al. Aging Behavior And Precipitate Characterization of a High Zn-Containing Al-Zn-Mg-Cu Alloy with Various Tempers[J]. Materials and Design, 2016, 101: 16– 23 [Article] [CrossRef] [Google Scholar]
  6. Xiao Y P, Pan Q L, Li W B, et al. Influence of Retrogression and Re-Aging Treatment on Corrosion Behaviour of an Al-Zn-Mg-Cu Alloy[J]. Materials & Design, 2011, 32 (4): 2149– 2156 [Article] [CrossRef] [Google Scholar]
  7. Lin Hong, Liu Li. Effect of Two-Stage Aging on Mechanical Properties and Intergranular Corrosion Properties of 7XXX Aluminum Alloy[J]. Forging Technology, 2015, 40 (10): 122– 125 [Article](in Chinese) [Google Scholar]
  8. Ozer G, Karaaslan A. Relationship of RRA Heat Treatment with Exfoliation Corrosion, Electrical Conductivity and Microstructure of AA7075 Alloy[J]. Materials and Corrosion, 2017, 68: 1260– 1267 [Article] [CrossRef] [Google Scholar]
  9. Li Hongying. Fracture Analysis of Metal Tensile Specimens[J]. Journal of Shanxi Datong University, 2011, 27 (1): 76– 79 [Article](in Chinese) [Google Scholar]
  10. Ning Ailin, Jiang Shousheng, Peng Beishan. Mechanical Properties and Electrical Conductivity of Aluminum Alloy[J]. Light Metal, 2005 (6): 34– 36 [Article](in Chinese) [Google Scholar]
  11. Waterloo G, Hansen V, Gjnnes J, et al. Effect of Predeformation and Preaging at Room Temperature in Al-Zn-Mg-(Cu, Zr) Alloys[J]. Materials Science and Engineering A, 2001 (303): 226– 233 [Article] [Google Scholar]
  12. Li Y Y, Kovarik L, Phillips P J, et al. High-Resolution Characterization of the Precipitation Behavior of an Al-Zn-Mg-Cu Alloy[J]. Philosophical Magazine Letters, 2012, 92 (4): 166– 178 [Article] [CrossRef] [Google Scholar]
  13. Blaschko O, Ernst G, Fratzl P, et al. A Neutron Scattering Investigation of the Early Stages of Guinier-Preston Zone Formation in Al-Zn-Mg-(Cu) Alloys[J]. Acta Mater, 1982, 30 (2): 547– 552 [Article] [CrossRef] [Google Scholar]
  14. Liao Yuguo, Han Xiaoqi, Zeng Miaoxia, et al. Effect of Cu on Recrystallization of 7XXX Series Aluminum Alloy[J]. Shanghai Metal, 2014, 36 (3): 25– 28 [Article](in Chinese) [Google Scholar]
  15. Xia P, Liu Z, Bai S, et al. Enhanced Fatigue Crack Propagation Resistance in a Superhigh Strength Al-Zn-Mg-Cu Alloy by Modifying RRA Treatment[J]. Materials Characterization, 2016, 118: 438– 445 [Article] [CrossRef] [Google Scholar]
  16. Shen Rujuan, Xiao Daihong. Effect of Aging Heat Treatment on Microstructure and Properties of 7B50 Super-Strong Aluminum Alloy[J]. Powder Metallurgy Materials Science and Engineering, 2016, 21 (1): 78– 84 [Article](in Chinese) [Google Scholar]
  17. Teng Tianjiao, Tan Zihao, Yang Lin, et al. Effect of Retrogression and Re-Aging Treatment on Mechanical Properties and Corrosion Resistance of Al-6Zn-2Mg-2Cu Alloy[J]. Journal of Materials Heat Treatment, 2018, 39 (1): 14– 19 [Article](in Chinese) [Google Scholar]
  18. Yang Rongxian, Liu Zhiyi, Chen Lai, et al. Effect of Retrogression and Reaging on Mechanical Properties and Microstructure of Ultra High Strength Aluminum Alloy[J]. Powder Metallurgy Materials Science and Engineering, 2016, 21 (2): 264– 269 [Article](in Chinese) [Google Scholar]
  19. Sun Gang, Liang Chunxia, Cui Jianzhong, et al. Effect of Retrogression and Re-Aging Treatment on Microstructure and Properties of 7050 Aluminum Alloy[J]. Special Casting and Non-Ferrous Alloys, 2017 (9): 929– 932 [Article](in Chinese) [Google Scholar]
  20. Wang Chunhua, Zhang Tao, Yin Hongxia, et al. Effect of Aging Treatment on Microstructure and Properties of 7075 Aluminum Alloy[J]. Heat Treatment of Metals, 2017 (9): 87– 89 [Article](in Chinese) [Google Scholar]
  21. Wang R Z T Z T. Handbook of Aluminium Alloy and its Working[M]. Changsha: Central South University Press, 2000 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.