Open Access
| Issue |
JNWPU
Volume 38, Number 4, August 2020
|
|
|---|---|---|
| Page(s) | 838 - 845 | |
| DOI | https://doi.org/10.1051/jnwpu/20203840838 | |
| Published online | 06 October 2020 | |
- SACKL S, LEITNER H, CLEMENS H, et al. On the Evolution of Secondary Hardening Carbides during Continuous Versus Isothermal Heat Treatment of High Speed Steel HS 6-5-2[J]. Materials Characterization, 2016, 120: 323– 30 [Article] [CrossRef] [Google Scholar]
- PENG H, HU L, LI L, et al. Evolution of the Microstructure and Mechanical Properties of Powder Metallurgical High-Speed Steel S390 after Heat Treatment[J]. Journal of Alloys & Compounds, 2017, 740: 766– 773 [Article] [CrossRef] [Google Scholar]
- GARC A C, ROMERO A, HERRANZ G, et al. Effect of Vanadium Carbide on Dry Sliding Wear Behavior of Powder Metallurgy AISI M2 High Speed Steel Processed by Concentrated Solar Energy[J]. Materials Characterization, 2016, 121: 175– 186 [Article] [CrossRef] [Google Scholar]
- WU Yuanchang. Evolution of Technology of Powder Metallurgy High Speed Steel[J]. Powder Metallurfy Industry, 2007, 17 (2): 30– 36 [Article] (in Chinese) [Google Scholar]
- CHEN N, LUO R, XIONG H W, et al. Dense M2 High Speed Steel Containing Core-Shell MC Carbonitrides Using High-Energy Ball Milled M2/VN Composite Powders[J/OL].(2019-11-04)[2020-02-10]. [Article] [Google Scholar]
- ZHANG Shouhua. Alloy Steel[M]. Beijing: Metallurgical Industry Press, 1981 (in Chinese) [Google Scholar]
- CUI Kun. Composition, Microstructure and Properties of Steel[M.] Beijing: Science Press, 2013 (in Chinese) [Google Scholar]
- WANG Yisan, DING Yichao, CHENG Fengjun, et al. Iron Matrix Composite Reinforced by VC Particulates Produced by Solid Reaction[J]. Hot Working Technology, 2004, (9): 9– 11 [Article] (in Chinese) [Google Scholar]
- TONG Shiwei. Preparation of M2 Powder Metallurgy High Speed Steel and Research on Its Microstructure and Properties[D]. Xiangtan: Xiangtan University, 2016(in Chinese) [Google Scholar]
- GODEC M, BATIĈ B Š, MANDRINO D. Characterization of the Carbides and the Martensite Phase in Powder-Metallurgy High-Speed Steel[J]. Materials Characterization, 2010, 61 (4): 452– 458 [Article] [CrossRef] [Google Scholar]
- WU Wendeng, XIONG Xiang, LIU Rutie, et al. Effect of Carbon Content on Microstructure and Properties of M2 High Speed Steel Prepared by Elemental Powder Method[J]. Materials Science and Engineering of Powder Metallurgy, 2019, 24 (3): 273– 281 [Article] (in Chinese) [Google Scholar]
- GIERL-MAYER C, CALDERON R D O, DANNINGER H. The Role of Oxygen Transfer in Sintering of Low Alloy Steel Powder Compacts:a Review of the "Internal Getter" Effect[J]. JOM, 2016, 68 (3): 920– 927 [Article] [CrossRef] [Google Scholar]
- JIANG Shuyong, XU Xiaoyu, ZHU Guonü. VCp-Reinforced Iron Matrix Composites Produced by Sintering Synthesis[J]. Material & Heat Treatment, 2010, 39 (2): 56– 58 [Article] (in Chinese) [Google Scholar]
- DENG Yukun. High Speed Tool Steel[M]. Beijing: Metallurgical Industry Press, 2002 (in Chinese) [Google Scholar]
- HUANG Peiyun. Principle of Powder Metallurgy[M]. Beijing: Metallurgical Industry Press, 1997 (in Chinese) [Google Scholar]
- PAN F S, WANG W Q, TANG A T, et al. Phase Transformation Refinement of Coarse Primary Carbides in M2 High Speed Steel[J]. Progress in Natural Science:Materials International, 2011, 21 (2): 180– 186 [Article] [CrossRef] [Google Scholar]
- ZHENG Yong. First-Principles Study of Stability and Mechanical Property of MC and M_2C in High Speed Steel[D]. Nanjing: Southeast University, 2018(in Chinese) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.