EDP Sciences logo
Submit your paper
Search
Menu
All issues Volume 40 / No 2 (April 2022) JNWPU, 40 2 (2022) 229-242 References
Open Access
Issue
JNWPU
Volume 40, Number 2, April 2022
Page(s) 229 - 242
DOI https://doi.org/10.1051/jnwpu/20224020229
Published online 03 June 2022
  1. Hirano K. Application of eutectic composites to gas turbine system and fundamental fracture properties up to 1 700[J]. Journal of the European Ceramic Society, 2005, 25(8): 1191–1199 [Article] [CrossRef] [Google Scholar]
  2. Nakagawa N, Ohtsubo H, Mitani A, et al. High temperature strength and thermal stability for melt growth composite[J]. Journal of the European Ceramic Society, 2005, 251251–1257 [Article] [CrossRef] [Google Scholar]
  3. Ren Q, Su H, Zhang J, et al. Rapid eutectic growth of Al2O3/Er3Al5O12 nanocomposite prepared by a new method: melt falling-drop quenching[J]. Scripta Materialia, 2016, 125: 39–43 [Article] [CrossRef] [Google Scholar]
  4. Su H, Zhang J, Yu J, et al. Directional solidification and microstructural development of Al2O3/GdAlO3 eutectic ceramic in situ composite under rapid growth conditions[J]. Journal of Alloys and Compounds, 2011, 509(12): 4420–4425 [Article] [CrossRef] [Google Scholar]
  5. Waku Y, Nakagawa N, Kobayashi K, et al. Innovative manufacturing process of MGC components for ultra-high efficiency gas turbine systems[C]//Proceedings of ASME Turbo Expo 2004: Power for Land, Sea, and Air, Vienna, Austria, 2004 [Google Scholar]
  6. Waku Y, Nakagawa N, Wakamoto T, et al. A ductile ceramic eutectic composite with high strength at 1 873 K[J]. Nature, 1997, 389: 49–52 [Article] [NASA ADS] [CrossRef] [Google Scholar]
  7. Lee J H, Yoshikawa A, Durbin S D, et al. Microstructure of Al2O3/ZrO2 eutectic fibers grown by the micro-pulling down method[J]. Journal of Crystal Growth, 2001, 222: 791–796 [Article] [NASA ADS] [CrossRef] [Google Scholar]
  8. Benamara O, Cherif M, Duffar T, et al. Microstructure and crystallography of Al2O3-Y3Al5O12-ZrO2 ternary eutectic oxide grown by the micropulling down technique[J]. Journal of Crystal Growth, 2015, 429: 27–34 [Article] [NASA ADS] [CrossRef] [Google Scholar]
  9. Lee J H, Yoshikawa A, Fukuda T, et al. Growth and characterization of Al2O3/Y3Al5O12/ZrO2 ternary eutectic fibers[J]. Journal of Crystal Growth, 2001, 231: 115–120 [Article] [NASA ADS] [CrossRef] [Google Scholar]
  10. Andreeta E R M, Andreeta M R B, Hernandes A C. Laser heated pedestal growth of Al2O3/GdAlO3 eutectic fibers[J]. Journal of Crystal Growth, 2002, 234: 782–785 [Article] [NASA ADS] [CrossRef] [Google Scholar]
  11. Laidoune A, Lebbou K, Bahloul D. Microstructure of the yttria doped Al2O3-ZrO2 eutectic fibers grown by the laser heated pedestal growth(LHPG) method[J]. Journal of Crystal Growth, 2013, 380: 224–227 [Article] [NASA ADS] [CrossRef] [Google Scholar]
  12. Su H, Ren Q, Zhang J, et al. Microstructures and mechanical properties of directionally solidified Al2O3/GdAlO3 eutectic ceramic by laser floating zone melting with high temperature gradient[J]. Journal of the European Ceramic Society, 2017, 37: 1617–1626 [Article] [CrossRef] [Google Scholar]
  13. Fan G, Su H, Zhang J, et al. Microstructure and cytotoxicity of Al2O3-ZrO2 eutectic bioceramics with high mechanical properties prepared by laser floating zone melting[J]. Ceramics International, 2018, 44(15): 17978–17985 [Article] [CrossRef] [Google Scholar]
  14. Su H, Wang E, Ren Q, et al. Microstructure tailoring and thermal stability of directionally solidified Al2O3/GdAlO3 binary eutectic ceramics by laser floating zone melting[J]. Ceramics International, 2018, 44(7): 7908–7916 [Article] [CrossRef] [Google Scholar]
  15. Su H, Zhang J, Cui C, et al. Rapid solidification of Al2O3/Y3Al5O12/ZrO2 eutectic in situ composites by laser zone remelting[J]. Journal of Crystal Growth, 2007, 307: 448–456 [Article] [NASA ADS] [CrossRef] [Google Scholar]
  16. Fan Z, Zhao Y, Tan Q, et al. Nanostructured Al2O3-YAG-ZrO2 ternary eutectic components prepared by laser engineered net shaping[J]. Acta Materialia, 2019, 170: 24–37 [Article] [NASA ADS] [CrossRef] [Google Scholar]
  17. Liu H, Su H, Shen Z, et al. One-step additive manufacturing and microstructure evolution of melt-grown Al2O3/GdAlO3/ZrO2 eutectic ceramics by laser directed energy deposition[J]. Journal of the European Ceramic Society, 2021, 41: 3547–3558 [Article] [CrossRef] [Google Scholar]
  18. Liu H, Su H, Shen Z, et al. Preparation of large-size Al2O3/GdAlO3/ZrO2 ternary eutectic ceramic rod by laser directed energy deposition and its microstructure homogenization mechanism[J]. Journal of Material Science & Technology, 2021, 85: 218–223 [CrossRef] [Google Scholar]
  19. Liu H, Su H, Shen Z, et al. Direct formation of Al2O3/GdAlO3/ZrO2 ternary eutectic ceramics by selective laser melting: microstructure evolutions[J]. Journal of the European Ceramic Society, 2018, 38: 5144–5152 [Article] [CrossRef] [Google Scholar]
  20. Niu F, Wu D, Ma G, et al. Nanosized microstructure of Al2O3-ZrO2(Y2O3) eutectics fabricated by laser engineered net shaping[J]. Scripta Materialia, 2015, 95: 39–41 [Article] [CrossRef] [Google Scholar]
  21. Waku Y, Nakagawa N, Wakamoto T, et al. High-temperature strength and thermal stability of a unidirectionally solidified Al2O3/YAG eutectic composite[J]. Journal of Materials Science, 1998, 33: 1217–1225 [Article] [NASA ADS] [CrossRef] [Google Scholar]
  22. Liu H, Su H, Shen Z, et al. Insights into high thermal stability of laser additively manufactured Al2O3/GdAlO3/ZrO2 eutectic ceramics under high temperatures[J]. Additive Manufacturing, 2021, 48: 102425[Article] [CrossRef] [Google Scholar]
  23. Llorca J, Orera V M. Directionally solidified eutectic ceramic oxides[J]. Progress in Materials Science, 2006, 51: 711–809 [Article] [CrossRef] [Google Scholar]
  24. Paradis P F, Ishikawa T. Surface tension and viscosity measurements of liquid and undercooled alumina by containerless techniques[J]. Japanese Journal of Applied Physics, 2005, 44: 5082–5085 [Article] [NASA ADS] [CrossRef] [Google Scholar]
  25. Zhou X, Liu X, Zhang D, et al. Balling phenomena in selective laser melted tungsten[J]. Journal of Materials Processing Technology, 2015, 222: 33–42 [Article] [CrossRef] [Google Scholar]
  26. Su H, Liu Y, RenQ, et al. Distribution control and formation mechanism of gas inclusions in directionally solidified Al2O3-Er3Al5O12-ZrO2 ternary eutectic ceramic by laser floating zone melting[J]. Journal of Material Science & Technology, 2021, 66: 21–27 [CrossRef] [Google Scholar]
  27. ShenZhonglin, Su Haijun, Liu Haifang, et al. Research progress on laser additive manufacturing technology and its defect control for ultra-high temperature oxide ceramics[J]. Acta Materiae Compositae Sinica, 2021, 38: 668–679[Article] (in Chinese) [Google Scholar]
  28. Yan S, Huang Y, Zhao D, et al. 3D printing of nano-scale Al2O3-ZrO2 eutectic ceramic: principle analysis and process optimization of pores[J]. Additive Manufacturing, 2019, 28: 120–126 [Article] [CrossRef] [Google Scholar]
  29. Su H, Zhang J, Liu L, et al. Rapid growth and formation mechanism of ultrafine structural oxide eutectic ceramics by laser direct forming[J]. Applied Physics Letters, 2011, 99: 221913[Article] [NASA ADS] [CrossRef] [Google Scholar]
  30. Li F, Liu Z, Li B, et al. Pore formation model for direct laser deposition of Al2O3-ZrO2 ceramic[J]. Journal of the European Ceramic Society, 2022, 42: 207–215 [Article] [CrossRef] [Google Scholar]
  31. Liu H, Su H, Shen Z, et al. Effect of scanning speed on the solidification process of Al2O3/GdAlO3/ZrO2 eutectic ceramics in a single track by selective laser melting[J]. Ceramics International, 2019, 45: 17252–17257 [Article] [CrossRef] [Google Scholar]
  32. Wu D, Lu F, Zhao D, et al. Effect of doping SiC particles on cracks and pores of Al2O3-ZrO2 eutectic ceramics fabricated by directed laser deposition[J]. Journal of Materials Science, 2019, 54: 9321–9330 [Article] [NASA ADS] [CrossRef] [Google Scholar]
  33. Ferrage L, Bertrand G, Lenormand P. Dense yttria-stabilized zirconia obtained by direct selective laser sintering[J]. Additive Manufacturing, 2018, 21: 472–478 [Article] [CrossRef] [Google Scholar]
  34. Zhang K, Liu T, Liao W, et al. Influence of laser parameters on the surface morphology of slurry-based Al2O3 parts produced through selective laser melting[J]. Rapid Prototyping Journal, 2018, 24: 333–341 [Article] [CrossRef] [Google Scholar]
  35. Niu F, Wu D, Yan S, et al. Process optimization for suppressing cracks in laser engineered net shaping of Al2O3 ceramics[J]. The Journal of the Minerals, Metals & Materials Society, 2017, 69: 557–562 [NASA ADS] [CrossRef] [Google Scholar]
  36. Liu Q, Song B, Liao H. Microstructure study on selective laser melting yttria stabilized zirconia ceramic with near IR fiber laser[J]. Rapid Prototyping Journal, 2014, 20: 346–354 [Article] [CrossRef] [Google Scholar]
  37. Hu Y, Ning F, Cong W, et al. Ultrasonic vibration-assisted laser engineering net shaping of ZrO2-Al2O3 bulk parts: effects on crack suppression, microstructure, and mechanical properties[J]. Ceramics International, 2018, 44: 2752–2760 [Article] [CrossRef] [Google Scholar]
  38. Liu Hanchao, Lu Fan, Ma Guangyi, et al. Effect of constant temperature substrate on microstructure and hardness of Al2O3-based eutectic ceramics[J]. Opto-Electronic Engineering, 2017, 44: 1194–1199[Article] (in Chinese) [Google Scholar]
  39. Ma W, Zhang J, Su H, et al. Theoretical prediction and experimental comparison for eutectic growth of Al2O3/GdAlO3 faceted eutectics[J]. Journal of the European Ceramic Society, 2019, 39: 3837–3842 [Article] [CrossRef] [Google Scholar]
  40. Su H, Shen Z, Ren Q, et al. Evolutions of rod diameter, molten zone and temperature gradient of oxide eutectic ceramics during laser floating zone melting[J]. Ceramics International, 2020, 46: 18750–18757 [Article] [CrossRef] [Google Scholar]
  41. Ma W, Zhang J, Su H, et al. Microstructure transformation from irregular eutectic to complex regular eutectic in directionally solidified Al2O3/GdAlO3/ZrO2 ceramics by laser floating zone melting[J]. Journal of the European Ceramic Society, 2016, 36: 1447–1454 [Article] [CrossRef] [Google Scholar]
  42. Ma W, Zhang J, Su H, et al. Phase growth patterns for Al2O3/GdAlO3 eutectics over wide ranges of compositions and solidification rates[J]. Journal of Materials Science & Technology, 2021, 65: 89–98 [CrossRef] [Google Scholar]
  43. Ma W, Su H, Zhang J, et al. Effects of composition and solidification rate on growth striations in laser floating zone melted Al2O3/GdAlO3 eutectic ceramics[J]. Journal of the American Ceramic Society, 2018, 101: 3337–3346 [Article] [CrossRef] [Google Scholar]
  44. Yan S, Wu D, Ma G, et al. Formation mechanism and process optimization of nano Al2O3-ZrO2 eutectic ceramic via laser engineered net shaping (LENS)[J]. Ceramics International, 2017, 43: 14742–14747 [Article] [CrossRef] [Google Scholar]
  45. Ren Q, Su H, Zhang J, et al. Microstructure control, competitive growth and precipitation rule in faceted Al2O3/Er3Al5O12 eutectic in situ composite ceramics prepared by laser floating zone melting[J]. Journal of the European Ceramic Society, 2019, 39: 1900–1908 [Article] [CrossRef] [Google Scholar]
  46. Ren Q, Su H, Zhang J, et al. Eutectic growth behavior with regular arrangement in the faceted Al2O3/Er3Al5O12 irregular eutectic system at low growth rate[J]. Scripta Materialia, 2019, 162: 49–53 [Article] [NASA ADS] [CrossRef] [Google Scholar]
  47. Wu Dongjiang, Sun Bei, Niu Fangyong, et al. Microstructure and crack in color Al2O3 samples by laser engineered net shaping[J]. Journal of the Chinese Ceramic Society, 2013, 41: 1621–1626[Article] (in Chinese) [Google Scholar]
  48. Wu D, Liu H, Lu F, et al. Al2O3-YAG eutectic ceramic prepared by laser additive manufacturing with water-cooled substrate[J]. Ceramics International, 2019, 45: 4119–4122 [Article] [CrossRef] [Google Scholar]
  49. Yan S, Wu D, Niu F, et al. Effect of ultrasonic power on forming quality of nano-sized Al2O3-ZrO2 eutectic ceramic via laser engineered net shaping (LENS)[J]. Ceramics International, 2018, 44: 1120–1126 [Article] [CrossRef] [Google Scholar]
  50. Yan S, Wu D, Niu F, et al. Al2O3-ZrO2 eutectic ceramic via ultrasonic-assisted laser engineered net shaping[J]. Ceramics International, 2017, 43: 15905–15910 [Article] [CrossRef] [Google Scholar]
  51. Wang X, Wang J Y, Sun L C, et al. Microstructure evolution of Al2O3/Y3Al5O12 eutectic crystal during directional solidification[J]. Scripta Materialia, 2015, 108: 31–34 [Article] [CrossRef] [Google Scholar]
  52. Ma X, Li J, Peng Z, et al. Interpenetrating network-structured Al2O3-Y3Al5O12 eutectic composite grown by containerlessly directional solidification process[J]. Crystal Growth & Design, 2015, 15: 5652–5655 [CrossRef] [Google Scholar]
  53. Sakata S, Mitani A, Shimizu K, et al. Crystallographic orientation analysis and high temperature strength of melt growth compo-site[J]. Journal of the European Ceramic Society, 2005, 25: 1441–1445 [Article] [CrossRef] [Google Scholar]
  54. Fan Z, Zhao Y, Tan Q, et al. New insights into the growth mechanism of 3D-printed Al2O3-Y3Al5O12 binary eutectic composites[J]. Scripta Materialia, 2020, 178: 274–280 [Article] [CrossRef] [Google Scholar]
  55. Larrea A, Fuente G F, Merino R I, et al. ZrO2-Al2O3 eutectic plates produced by laser zone melting[J]. Journal of the European Ceramic Society, 2002, 22: 191–198 [Article] [CrossRef] [Google Scholar]
  56. Ohashi Y, Yasui N, Suzuki T, et al. Orientation relationships of unidirectionally aligned GdAlO3/Al2O3 eutectic fibers[J]. Journal of the European Ceramic Society, 2014, 34: 3849–3857 [Article] [CrossRef] [Google Scholar]
  57. Mazerolles L, Perriere L, Lartigue KORINEK S, et al. Microstructures, crystallography of interfaces, and creep behavior of melt-growth composites[J]. Journal of the European Ceramic Society, 2008, 28: 2301–2308 [Article] [CrossRef] [Google Scholar]
  58. Mesa M C, Serrano-Zabaleta S, Oliete P B, et al. Microstructural stability and orientation relationships of directionally solidified Al2O3-Er3Al5O12-ZrO2 eutectic ceramics up to 1600℃[J]. Journal of the European Ceramic Society, 2014, 34: 2071–2080 [Article] [CrossRef] [Google Scholar]
  59. Wang X, Zhong Y, Sun Q, et al. Crystallography and interfacial structure in a directionally solidified Al2O3/Y3Al5O12/ZrO2 eutectic crystal[J]. Scripta Materialia, 2018, 145: 23–27 [Article] [CrossRef] [Google Scholar]
  60. Wang X, Wang D, Zhang H, et al. Mechanism of eutectic growth in directional solidification of an Al2O3/Y3Al5O12 crystal[J]. Scripta Materialia, 2016, 116: 44–48 [Article] [NASA ADS] [CrossRef] [Google Scholar]
  61. Murayama Y, Hanada S, Lee J H, et al. High-temperature strength of directionally solidified Al2O3/YAG/ZrO2 eutectic composite[C]//Materials Science Forum, Switzerland, 2005 [Google Scholar]
  62. Yoshimura M, Sakata S, Yamada S, et al. The growth of Al2O3/YAG: Ce melt growth composite by the vertical bridgman technique using an a-axis Al2O3 seed[J]. Journal of Crystal Growth, 2015, 427: 16–20 [Article] [NASA ADS] [CrossRef] [Google Scholar]
  63. Wang X, Zhong Y, Wang D, et al. Effect of interfacial energy on microstructure of a directionally solidified Al2O3/YAG eutectic ceramic[J]. Journal of the American Ceramic Society, 2018, 101: 1029–1035 [Article] [CrossRef] [Google Scholar]
  64. Waku Y, Sakata S, Mitani A, et al. Temperature dependence of flexural strength and microstructure of Al2O3/Y3Al5O12/ZrO2 ternary melt growth composites[J]. Journal of Materials Science, 2002, 37: 2975–2982 [Article] [CrossRef] [Google Scholar]
  65. Murayama Y, Hanada S, Lee J H, et al. Microstructure and high-temperature strength of directionally solidified Al2O3/YAG/ZrO2 eutectic composite[J]. Materials Transactions, 2004, 45: 303–306 [Article] [NASA ADS] [CrossRef] [Google Scholar]
  66. Lee J H, Yoshikawa A, Murayama Y, et al. Microstructure and mechanical properties of Al2O3/Y3Al5O12/ZrO2 ternary eutectic materials[J]. Journal of the European Ceramic Society, 2005, 25: 1411–1417 [Article] [CrossRef] [Google Scholar]
  67. Pastor J Y, Llorca J, Salazar A, et al. Mechanical properties of melt-grown alumina-yttrium aluminum garnet eutectics up to 1 900 K[J]. Journal of the American Ceramic Society, 2005, 88: 1488–1495 [Article] [CrossRef] [Google Scholar]
  68. Oliete P B, Pena J I, Larrea A, et al. Ultra-high-strength nanofibrillar Al2O3-YAG-YSZ eutectics[J]. Advanced Materials, 2007, 19: 2313–2318 [Article] [CrossRef] [Google Scholar]
  69. Park D Y, Yang J M. Effect of the microstructure on the mechanical properties of a directionally solidified Y3Al5O12/Al2O3 eutectic fiber[J]. Journal of Materials Science, 2001, 36: 5593–5601 [Article] [NASA ADS] [CrossRef] [Google Scholar]
  70. Courtright E L, Laboratory P N, Haggerty J S, et al. Controlling microstructure in ZrO2/(Y2O3)-Al2O3 eutectic fibers[J]. Ceramic Engineering and Science Proceedings, 1993, 14: 671–681 [CrossRef] [Google Scholar]
  71. Waku Y. A new ceramic eutectic composite with high strength at 1 873 K[J]. Advanced Materials, 1998, 10(8): 615–617 [Article] [CrossRef] [Google Scholar]
  72. Su H, Zhang J, Ma W, et al. In situ fabrication of highly-dense Al2O3/YAG nanoeutectic composite ceramics by a modified laser surface processing[J]. Journal of the European Ceramic Society, 2014, 34: 739–744 [Article] [CrossRef] [Google Scholar]
  73. Zhang J, Su H, Song K, et al. Microstructure, growth mechanism and mechanical property of Al2O3-based eutectic ceramic in situ composites[J]. Journal of the European Ceramic Society, 2011, 31: 1191–1198 [Article] [CrossRef] [Google Scholar]
  74. Su H, Zhang J, Cui C, et al. Rapid solidification behaviour of Al2O3/Y3Al5O12(YAG) binary eutectic ceramic in situ composites[J]. Materials Science and Engineering A, 2008, 479: 380–388 [Article] [CrossRef] [Google Scholar]
  75. Nie Y, Zhang M, Liu Y, et al. Microstructure and mechanical properties of Al2O3/YAG eutectic ceramic grown by horizontal directional solidification method[J]. Journal of Alloys and Compounds, 2016, 657: 184–191 [Article] [CrossRef] [Google Scholar]
  76. Yan S, Wu D, Huang Y, et al. C fiber toughening Al2O3-ZrO2 eutectic via ultrasonic-assisted directed laser deposition[J]. Materials Letters, 2019, 235: 228–231 [Article] [CrossRef] [Google Scholar]
  77. Mazerolles L, Piquet N, Trichet M F, et al. New microstructures in ceramic materials from the melt for high temperature applications[J]. Aerospace Science and Technology, 2008, 12: 499–505 [Article] [CrossRef] [Google Scholar]
  78. Larrea A, Orera V M, Merino R I, et al. Microstructure and mechanical properties of Al2O3-YSZ and Al2O3-YAG directionally solidified eutectic plates[J]. Journal of the European Ceramic Society, 2005, 25: 1419–1429 [Article] [CrossRef] [Google Scholar]
  79. Liu Z, Song K, Gao B, et al. Microstructure and mechanical properties of Al2O3/ZrO2 directionally solidified eutectic ceramic prepared by laser 3D printing[J]. Journal of Materials Science & Technology, 2016, 32: 320–325 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.