Open Access
Volume 40, Number 3, June 2022
Page(s) 465 - 475
Published online 19 September 2022
  1. MANOCHA L M. High performance carbon-carbon composites[J]. Sadhana, 2003, 28(1/2): 349–358 [CrossRef] [Google Scholar]
  2. CROCKER P, MCENANEY B. Oxidation and fracture of a woven 2D carbon-carbon composite[J]. Carbon, 1991, 29(7): 881–885 [Article] [CrossRef] [Google Scholar]
  3. HAN J C, HE X D, DU S Y. Oxidation and ablation of 3D carbon-carbon composite at up to 3 000℃[J]. Carbon, 1995, 33: 473n378 [Article] [CrossRef] [Google Scholar]
  4. HUANG Jianfeng, ZHANG Yutao, LI Hejun, et al. New advancement of oxidation protective coatings for C/C composites[J]. Journal of Aeronautical Materials, 2007, 27(2): 74–78 [Article] (in Chinese) [Google Scholar]
  5. FU Qiangang. Study on the SiC whisker-toughened silicides and SiC/glass oxidation protective coatings[D]. Xi’an: Northwestern Polytechnical University, 2007 (in Chinese) [Google Scholar]
  6. CHOY K L. Chemical vapour deposition of coatings[J]. Progress in Materials Science, 2003, 48(2): 57–170 [Article] [CrossRef] [Google Scholar]
  7. ZHOU Qing. Preparation of fiber reinforced silicon carbide matrix composites by vapor or liquid silicon infiltration[D]. Shanghai: Shanghai Institute of Ceramics, Chinese Academy of Sciences, 2008 (in Chinese) [Google Scholar]
  8. ZHU X F, ZHANG Y L, ZHANG J, et al. A gradient composite coating to protect SiC-coated C/C composites against oxidation at mid and high temperature for long-life service[J]. Journal of the European Ceramic Society, 2021, 41(16): 123–131 [Article] [CrossRef] [Google Scholar]
  9. SUN J, FU Q G, NIU G N, et al. Thermal shock resistance of thermal barrier coatings for nickel-based superalloy by supersonic plasma spraying[J]. Ceramics International, 2015, 41(8): 9972–9979 [Article] [CrossRef] [Google Scholar]
  10. YANG Shanjie, PENG Hui, GUO Hongbo. Failure and protection of thermal barrier coating under CMAS attack[J]. Journal of Aeronautical Materials, 2018, 39(2): 43–51[Article] (in Chinese) [Google Scholar]
  11. DONG L, LIU M J, ZHANG X F, et al. Infiltration thermodynamics in wrinkle-pores of thermal sprayed coatings[J]. Applied Surface Science, 2021, 543: 148847 [Article] [CrossRef] [Google Scholar]
  12. ZAPATA-SOLVAS E, JAYASEELAN D D, LIN H T, et al. Mechanical properties of ZrB2 and HfB2-based ultra-high temperature ceramics fabricated by spark plasma sintering[J]. Journal of the European Ceramic Society, 2013, 33(7): 1373–1386 [Article] [CrossRef] [Google Scholar]
  13. LI C, NIU Y R, LIU T, et al. Effect of WB on oxidation behavior and microstructure evolution of ZrB2-SiC coating[J]. Corrosion Science, 2019, 155: 155–163 [Article] [CrossRef] [Google Scholar]
  14. FENG X Q, WANG X, LIU Y, et al. Oxidation behaviour of plasma-sprayed ZrB2-SiC coatings[J]. Ceramics International, 2019, 45(2): 2385–2392 [Article] [CrossRef] [Google Scholar]
  15. WANG R Q, ZHU S Z, HUANG H B, et al. Low-pressure plasma spraying of ZrB2-SiC coatings on C/C substrate by adding TaSi2[J]. Surface and Coatings Technology, 2021, 420: 127332 [Article] [CrossRef] [Google Scholar]
  16. WANG Z, NIU Y R, HU C, et al. High temperature oxidation resistance of metal silicide incorporated ZrB2 composite coatings prepared by vacuum plasma spray[J]. Ceramics International, 2015, 41(10): 14868–14875 [Article] [CrossRef] [Google Scholar]
  17. WANG Guoqing. Study on preparation and high temperature performance of thermally protected thin-wall C/C composites[D]. Xi’an: Northwestern Polytechnical University, 2021(in Chinese) [Google Scholar]
  18. MA H C, MIAO Q, LIANG W P, et al. High temperature oxidation resistance of Y2O3 modified ZrB2-SiC coating for carbon/carbon composites[J]. Ceramics International, 2021, 47(5): 6728–6735 [Article] [CrossRef] [Google Scholar]
  19. PAN X H, LI C, NIU Y R, et al. Effect of Yb2O3 addition on oxidation/ablation behaviors of ZrB2-MoSi2 composite coating under different environment[J]. Corrosion Science, 2020, 175: 108882 [Article] [CrossRef] [Google Scholar]
  20. KIRCHER T A, COURTRIGHT E L. Engineering limitations of MoSi2 coatings[J]. Materials Science and Engineering A, 1992, 155(1/2): 67–74 [CrossRef] [Google Scholar]
  21. HUANG Jianfeng, LI Hejun, XIONG Xinbo, et al. Progress on the oxidation protective coating of carbon-carbon composites[J]. New Carbon Materials, 2005, 20(4): 373–379 [Article] (in Chinese) [Google Scholar]
  22. SUN J, FU Q G, LI T, et al. Oxidation behavior of thermally sprayed Mo-Si based composite: effect of metastable phase, porosity and residual stress[J]. Journal of Alloys and Compounds, 2019, 776: 712–721 [Article] [CrossRef] [Google Scholar]
  23. HU D, FU Q G, ZHOU L, et al. Self-healing improvement strategy of thermally sprayed MoSi2 coating at 1 500℃: from calculation to experiment[J]. Corrosion Science, 2021, 189: 109599 [Article] [CrossRef] [Google Scholar]
  24. WU H, LI H J, MA C, et al. MoSi2-based oxidation protective coatings for SiC-coated carbon/carbon composites prepared by supersonic plasma sprayingJournal of the European Ceramic Society 2010301532673270 [Article] [CrossRef] [Google Scholar]
  25. SUN J, FU Q G, HUO C X, et al. Oxidation response determined by multiphase-dependent melting degree of plasma sprayed MoSi2 on Nb-based alloy[J]. Journal of Alloys and Compounds, 2018, 762: 922–932 [Article] [CrossRef] [Google Scholar]
  26. FEI X A, NIU Y R, JI H, et al. A comparative study of MoSi2 coatings manufactured by atmospheric and vacuum plasma spray processes[J]. Ceramics International, 2011, 37(3): 813–817 [Article] [CrossRef] [Google Scholar]
  27. PAN Y, WANG S L. Insight into the oxidation mechanism of MoSi2: Ab-initio calculations[J]. Ceramics International, 2018, 44(16): 19583–19589 [Article] [CrossRef] [Google Scholar]
  28. XIE W, FU Q G, CHENG C Y, et al. Experimental and theoretical study on the effect of different rare-earth oxides on the high-temperature stability of SiO2 glass at 1 973 K[J]. Ceramics International, 2020, 46: 24371–24378 [Article] [CrossRef] [Google Scholar]
  29. WANG C C, LI K Z, SHI X H, et al. High-temperature oxidation behavior of plasma-sprayed ZrO2 modified La-Mo-Si composite coatings[J]. Materials & Design, 2017, 128, 20–33 [CrossRef] [Google Scholar]
  30. WANG C C, LI K Z, HE Q C, et al. Oxidation and ablation protection of plasma sprayed LaB6-MoSi2-ZrB2 coating for carbon/carbon composites[J]. Corrosion Science, 2019, 151: 57–68 [Article] [CrossRef] [Google Scholar]
  31. WANG C C, LI K Z, HE Q C, et al. High-temperature oxidation and ablation behavior of plasma sprayed LaB6-MoSi2-TiB2 composite coating[J]. Materials & Design, 2018, 152: 40–53 [CrossRef] [Google Scholar]
  32. WANG C C, LI K Z, HUO C X, et al. Evolution of microstructural feature and oxidation behavior of LaB6-modified MoSi2-SiC coating[J]. Journal of Alloys and Compounds, 2018, 753: 703–716 [Article] [CrossRef] [Google Scholar]
  33. WANG C C, LI K Z, SHI X H, et al. Self-healing YSZ-La-Mo-Si heterogeneous coating fabricated by plasma spraying to protect carbon/carbon composites from oxidation[J]. Composites Part B: Engineering, 2017, 125: 181–194 [Article] [CrossRef] [Google Scholar]
  34. WANG C C, LI K Z, HE D Y, et al. Oxidation behavior of plasma-sprayed MoSi2-Yb2O3 composite coating at 1 700℃[J]. Ceramics International, 2020, 46(7): 9538–9547 [Article] [CrossRef] [Google Scholar]
  35. WANG C C, LI K Z, HE D Y, et al. Evolution behavior of rare-earth yttria modified silicide oxidation-resistant coating at 1 700℃[J]. Journal of the European Ceramic Society, 2020, 40(13): 4419–4427 [Article] [CrossRef] [Google Scholar]
  36. WANG L, FU Q G, ZHAO F L. Improving oxidation resistance of MoSi2 coating by reinforced with Al2O3 whiskers[J]. Intermetallics, 2018, 94: 106–113 [Article] [CrossRef] [Google Scholar]
  37. WANG C C, LI K Z, HE Q C, et al. Oxidation resistance and mechanical properties of LaB6-MoSi2-SiC ceramic coating toughened by SiC nanowires[J]. Ceramics International, 2018, 44(14): 16365–16378 [Article] [CrossRef] [Google Scholar]
  38. WANG L, WANG W Y, FU Q G. The improvement of the self-healing ability of MoSi2 coatings at 900-1 200℃ by introducing SiB6[J]. Journal of the European Ceramic Society, 2020, 40(8): 2896–2906 [Article] [CrossRef] [Google Scholar]
  39. WANG L, FU Q G, LIU N K, et al. Supersonic plasma sprayed MoSi2-ZrB2 antioxidation coating for SiC-C/C composites[J]. Surface Engineering, 2016, 32(7): 508–513 [Article] [CrossRef] [Google Scholar]
  40. WANG L, FU Q G, ZHAO F L, et al. Constructing self-healing ZrSi2-MoSi2 coating for C/C composites with enhanced oxidation protective ability[J]. Surface and Coatings Technology, 2018, 347: 257–269 [Article] [CrossRef] [Google Scholar]
  41. LIU F, LI H J, ZHANG W, et al. Impact of introducing SiC and Si on microstructure and oxidation resistance of MoSi2/SiC coated C/C composites prepared by SAPS[J]. Vacuum, 2020, 179: 109477 [Article] [CrossRef] [Google Scholar]
  42. ZHANG G P, SUN J, FU Q G. Effect of mullite on the microstructure and oxidation behavior of thermal-sprayed MoSi2 coating at 1 500℃[J]. Ceramics International, 2020, 46(8): 10058–10066 [Article] [CrossRef] [Google Scholar]
  43. ZHANG G P, SUN J, FU Q G. Microstructure and oxidation behavior of plasma sprayed WSi2-mullite-MoSi2 coating on niobium alloy at 1 500℃[J]. Surface and Coatings Technology, 2020, 400: 126210 [Article] [CrossRef] [Google Scholar]
  44. WANG Lu. Self-healing gradient MoSi2-based anti-oxidation coatings prepared by SAPS[D]. Xi’an: Northwestern Polytechnical University, 2018 (in Chinese) [Google Scholar]
  45. HU D, FU Q G, ZHOU L, et al. Crack development behavior in thermally sprayed anti-oxidation coating under repeated thermal-oxygen coupling environment[J]. Ceramics International, 2021, 47(11): 15328–15336 [Article] [CrossRef] [Google Scholar]
  46. HU D, FU Q G, LIU B, et al. Multi-layered structural designs of MoSi2/mullite anti-oxidation coating for SiC-coated C/C composites[J]. Surface and Coatings Technology, 2021, 409: 126901 [Article] [CrossRef] [Google Scholar]
  47. HU D, FU Q G, ZHOU L, et al. Stress design of a laminated MoSi2/Cr coating under particle impact and high temperature environment[J]. Ceramics International, 2020, 46(8): 10696–10703 [Article] [CrossRef] [Google Scholar]
  48. CHOU T C, NIEH T G. Mechanism of MoSi2 pest during low temperature oxidation[J]. Journal of Materials Research, 1993, 8(1): 214–226 [Article] [NASA ADS] [CrossRef] [Google Scholar]
  49. LIU F, LI H J, GU S Y, et al. Spraying power influence on microstructure and bonding strength of ZrSi2 coating for SiC coated carbon/carbon composites[J]. Ceramics International, 2018, 44(6): 6619–6625 [Article] [CrossRef] [Google Scholar]
  50. LIU F, LI H J, GU S Y, et al. Effect of Y2O3 on the oxidation properties of ZrSi2/SiC coating prepared by SAPS on the carbon-carbon composites[J]. Ceramics International, 2018, 44(13): 15065–15071 [Article] [CrossRef] [Google Scholar]
  51. LIU F, LI H J, GU S Y, et al. Microstructure and oxidation property of CrSi2-ZrSi2-Y2O3/SiC coating prepared on C/C compos- ites by supersonic atmosphere plasma spraying[J]. Surface and Coatings Technology, 2019, 374: 966–974 [Article] [CrossRef] [Google Scholar]
  52. SUN C, LI H J, LUO H J, et al. Effect of Y2O3 on the oxidation resistant of ZrSiO4/SiC coating prepared by supersonic plasma spraying technique for carbon/carbon composites[J]. Surface and Coatings Technology, 2013, 235: 127–133 [Article] [CrossRef] [Google Scholar]
  53. 郭领军, 韩敏娜, 李贺军, 等. 在碳/碳复合材料表面制备碳化硅-焦硅酸镱复合涂层的方法[P]. 中国, CN101805212B [Google Scholar]
  54. GU S Y, ZHANG S Y, LIU F, et al. Microstructure and thermal shock performance of Y2Hf2O7 coating deposited on SiC coated C/C composite[J]. Applied Surface Science, 2018, 455: 849–855 [Article] [CrossRef] [Google Scholar]
  55. MA C, LI H J, WU H, et al. Mullite oxidation resistant coating for SiC-coated carbon/carbon composites by supersonic plasma spraying[J]. Journal of Materials Science & Technology, 2013, 29(1): 29–33 [CrossRef] [Google Scholar]
  56. ZHOU L, FU Q G, HUO C X, et al. Mullite whisker-mullite/yttrium aluminosilicate oxidation protective coatings for SiC coated C/C composites[J]. Ceramics International, 2019, 45(18): 24022–24030 [Article] [CrossRef] [Google Scholar]
  57. HUANG J F, LI H J, ZENG X R, et al. Structure and oxidation behavior of a plasma sprayed yttrium silicates coated SiC-C/C with a glass outer sealant from 1 573 K to 1 873 K[J]. Journal of Wuhan University of Technology(Materials Science), 2008, 23: 33–37 [Article] [CrossRef] [Google Scholar]
  58. MADHURA B, VETRIVENDAN E, RAO C, et al. Evaluation of oxidation resistant SiC-ZrB2 composite interlayer for plasma sprayed Y2O3 coating over graphite[J]. Corrosion Science, 2021, 190: 109645 [Article] [CrossRef] [Google Scholar]
  59. WANG Y W, NIU Y R, ZHONG X, et al. Water vapor corrosion behaviors of plasma sprayed ytterbium silicate coatings[J]. Ceramics International, 2020, 46(18): 28237–28243 [Article] [CrossRef] [Google Scholar]
  60. SUN L, FU Q G, SUN J, et al. Comparison investigation of hot corrosion exposed to Na2SO4 salt and oxidation of MoSi2-based coating on Nb alloy at 1 000℃[J]. Surface and Coatings Technology, 2020, 385: 125388 [Article] [CrossRef] [Google Scholar]
  61. SUN L, FU Q G, SUN J. Effect of SiO2 barrier scale prepared by pre-oxidation on hot corrosion behavior of MoSi2-based coating on Nb alloy[J]. Corrosion Science, 2020, 176: 109051 [Article] [CrossRef] [Google Scholar]
  62. SUN L, FU Q G, SUN J. Hot corrosion of SiO2-Ta2O5 binary scale on MoSi2-based ceramics[J]. Corrosion Science, 2021, 185: 109413 [Article] [CrossRef] [Google Scholar]
  63. LIU Jian, MENG Fanjun, YIN Fengliang, et al. Progress in research on bonding interface between thermal spraying coating and substrate[J]. Journal of Materials Engineering, 2017, 45(1): 101–110 [Article] (in Chinese) [Google Scholar]
  64. LIU Chunbo, LIN Feng, JIANG Xianliang. Current state and future development of thermal barrier coating[J]. The Chinese Journal of Nonferrous Metals, 2007, 17(1): 1–13 [Article] (in Chinese) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.