Issue |
JNWPU
Volume 42, Number 1, February 2024
|
|
---|---|---|
Page(s) | 70 - 77 | |
DOI | https://doi.org/10.1051/jnwpu/20244210070 | |
Published online | 29 March 2024 |
Region optimization and sensitivity analysis of THT assembly process parameters based on flexible soldering robot platform
柔性焊锡机器人THT组装工艺参数敏感度分析及区间优化
1
Xi’an Electronics Engineering Research Institute, Xi’an 710100, China
2
School of Intelligent Manufacturing and Control Technology, Xi’an Mingde Institute of Technology, Xi’an 710124, China
3
School of Mechanical Engineering, Northwestern Polytechnical University, Xi’an 710072, China
Received:
6
December
2022
In order to solve the problem that the selection of key process parameters of a flexible soldering robot depends on manual experience, the empirical model of its THT assembly process parameters is established with the response surface method and the reliability of the model is verified. On this basis, the multi-parameter relative sensitivity of the key process parameters is analyzed through the Monte-Carlo simulation, and their single-parameter sensitivity curve is drawn. Then, based on the sensitivity analysis, the stability region division method is designed, and the stability region of process parameters for soldering quality comprehensive score is obtained. The optimal region of process parameters of the soldering robot are acquired by compressing the stability region: soldering temperature from 350-368 ℃, soldering time from 1.31-1.48 s and solder feeding volume from 1.5-2.0 mm3. The average value of the soldering quality comprehensive score within the optimal region of process parameters is 90.2 points.
摘要
针对机器人焊接关键工艺参数的选取依赖人工经验的问题, 通过响应面法建立了自动化焊锡机器人THT组装工艺参数经验模型, 并验证了该模型的可靠性。在此基础上, 利用蒙特卡罗模拟分析关键焊接工艺参数的多参数相对敏感度, 并绘制了单工艺参数区间敏感度曲线。基于敏感度原理设计了工艺参数稳定域划分方法, 获得了面向焊接质量综合分的工艺参数稳定域, 并将该稳定域进行压缩得到机器人焊接工艺参数优选区间为: 加热温度350~368 ℃, 焊接时间1.31~1.48 s, 送锡体积1.5~2.0 mm3, 在工艺参数优选区间内焊接质量综合分平均值为90.2分。
Key words: soldering robot / process parameter / sensitivity analysis / stability region / region optimization
关键字 : 焊锡机器人 / 焊接工艺参数 / 敏感度分析 / 稳定域划分 / 区间优选
© 2024 Journal of Northwestern Polytechnical University. All rights reserved.
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (https://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.