Issue |
JNWPU
Volume 42, Number 6, December 2024
|
|
---|---|---|
Page(s) | 1099 - 1110 | |
DOI | https://doi.org/10.1051/jnwpu/20244261099 | |
Published online | 03 February 2025 |
Integrated sliding mode control of robot manipulator based on fuzzy adaptive RBF
基于模糊自适应RBF的机械臂积分滑模控制方法
1
School of Electronic Information, Xi'an Polytechnic University, Xi'an 710048, China
2
Shaanxi Joint Laboratory of Artificial Intelligence, Xi'an Polytechnic University, Xi'an 710048, China
Received:
6
November
2023
To solve the uncertainty of the parameters of the manipulator dynamics model, the control accuracy and convergence rate of the system affected by the joint friction and external interference, a compound control strategy based on the manipulator dynamics model is proposed. Firstly, a modified power-of-two convergence law is used and combined with an integral sliding mode to design a sliding mode control term to shorten the convergence of the tracking error. Secondly, the approximations of the uncertain variables of the dynamical model are accomplished by using the three sets of RBF neural networks and introducing an adaptive mechanism for online self-tuning of weights, the approximation errors of the RBF neural networks are compensated by using the sliding-mode control term designed in the previous section. Finally, the fuzzy controllers are utilized to calculate the coupled joint friction and outside disturbances. The simulation works show that comparing with the chunked RBF neural network to approximate the sliding mode control logy, the proposed hybrid control theory reduces the mechanical arm joint angular rate response time by 39.4%, the largest solid-state error was cut by 76.8%, and the medium-sized solid-state error was cut by 62.7%, improved control preciseness and the responsiveness of the spatial trajectory tracking of the manipulator arm's joints.
摘要
针对机械臂动力学模型参数具有不确定性, 系统控制精度和收敛速度受到关节摩擦和外部干扰影响的问题, 提出一种基于机械臂动力学模型的复合控制策略。结合改进型双幂次趋近律和积分滑模设计滑模控制项, 加快跟踪误差的收敛速度; 通过3组RBF神经网络分别逼近动力学模型的不确定参数, 引入自适应机制对权值进行在线的自适应整定, 并采用前述设计的滑模控制项补偿RBF神经网络的逼近误差; 利用模糊控制器对关节摩擦和外部干扰进行补偿。仿真结果表明, 与基于分块RBF神经网络逼近滑模控制算法相比, 所提出的复合控制策略使机械臂关节角速度响应时间缩减39.4%, 最大稳态误差缩减76.8%, 平均稳态误差缩减62.7%, 机械臂关节空间轨迹跟踪的控制精度和响应速度得到显著提高。
Key words: mechanical arm / orbit tracking / self-adaptive RBF neural network / fuzzy offset / integral sliding mode
关键字 : 机械臂 / 轨迹跟踪 / 自适应RBF神经网络 / 模糊补偿 / 积分滑模
© 2024 Journal of Northwestern Polytechnical University. All rights reserved.
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (https://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.