Open Access
| Issue |
JNWPU
Volume 37, Number 1, February 2019
|
|
|---|---|---|
| Page(s) | 129 - 136 | |
| DOI | https://doi.org/10.1051/jnwpu/20193710129 | |
| Published online | 03 April 2019 | |
- Liu Huoxing, An Yuge, Zou Zhengping. Aerothermal Analysis of a Turbine with Rim Seal Cavity[R]. ASME 2014-GT-25276 [Google Scholar]
- Song Liming, Zhu Peiyuan, Li Jun, et al. Effect of Purge Flow on Endwall Flow and Heat Transfer Characteristic of a Gas Turbine Blade[J]. Applied Thermal Engineering, 2017, 110(3): 504-520 [Article] [CrossRef] [Google Scholar]
- Jia Wei, Liu Huoxing. Numerical Investigation of the Effects of Rim Seal on Turbine Aerodynamic Design Parameters and End Wall Flows in Low-Aspect Ratio Turbine[J]. Computer & Fluids, 2013, 74(5): 114-125 [Article] [CrossRef] [Google Scholar]
- Zeng Jun, Zhang Weitao. Numerical Simulation of the Interaction between Rim Seal and Main Annulus Flow in a Four Stage Low-Pressure Axial Turbine[R]. AIAA-2015-3416 [Google Scholar]
- Popovic I, Hodson H P. The Effects of Parametric Variation of Rim Seal Geometry on the Interaction between Hub Leakage and Mainstream Flows in HP Turbine[R].ASME 2012-GT-68025 [Google Scholar]
- Ong J, Miller R J, Uchida S. The Effects of Coolant Injection on the Endwall Flow of a High Pressure Turbine[J]. Journal of Turbomachinery, 2012, 134(5): 051003-8 [Article] [Google Scholar]
- Boudet J, Hills N J, Chews J W. Numerical Simulation of the Flow Interaction between Turbine Main Annulus and Disc Cavities[R]. ASME 2006-GT-90307 [Google Scholar]
- Paniagua G, Denos R, Almeida S. Effect of the Hub Endwall Cavity Flow on the Flow-Field of a Transonic High-Pressure Turbine[J]. Journal of Turbomachinery, 2004, 126(10): 578-586 [CrossRef] [Google Scholar]
- Jenny P, Abhari R S, Rosa M G, et al. Unsteady Rotor Hub Passage Vortex Behavior in the Presence of Purge Flow in an Axial Low Pressure Turbine[R]. ASME 2012-GT-69256 [Google Scholar]
- Regina K, Kalfas A I, Abhari R S. Experimental Investigation of Purge Flow Effects on a High Pressure Turbine Stage[J]. Journal of Turbomachinery, 2014, 137(4): 041006-8 [Article] [CrossRef] [Google Scholar]
- Schadler R, Kalfas A I, Abhari R S. Modulation and Radial Migration for Turbine Hub Modes by the Rim Seal Purge Flow[R]. ASME 2016-GT-56661 [Google Scholar]
- Behr T. Control of Rotor Tip Leakage and Secondary Flow by Casing Air Injection in Unshrouded Axial Turbines[D]. Dresden: Dresden University of Technology, 2007 [Google Scholar]
- Schuepbach P. Influence of Rim Seal Purge Flow on Performance of an Endwall Profiled Axial Turbine[D]. Swiss: Swiss Federal Institute of Technology, 2009 [Article] [Google Scholar]
- Zhang Jinghui, Ma Hongwei. Unsteady Numerical Investigation for Effects of Rim Sealing Flow on Performance of a Turbine Rotor[J]. Journal of Propulsion Technology, 2014, 35(4): 470-478 (in Chinese) [Article] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.