Open Access
Volume 37, Number 6, December 2019
Page(s) 1085 - 1094
Published online 11 February 2020
  1. ZhangJianhua. Pyroshock Environment of Missiles and Launch Vehicles[J]. Missiles and Space Vehicles, 2005, (3): 30–35 [Article] (in Chinese) [Google Scholar]
  2. PangZ, LiuY, LiM, et al. Influence of Process Parameter and Strain Rate on the Dynamic Compressive Properties of Selective Laser-Melted Ti-6Al-4V Alloy[J]. Applied Physics A, 2019, 125(2): 90 [Article] [CrossRef] [Google Scholar]
  3. Wu Bin. Design on a Pneumatic Vertical Shock Test Apparatus[J]. Machinery Design & Manufacture, 2008, (4): 38–40 [Article] [Google Scholar]
  4. QiaoLiang, LuFei, ZhaoQinglan. Experiment Design of Wave Generator Parameters of Gun Simulation Test Device[J]. Fire Control & Command Control, 2013, 38(1): 166–169 [Article] (in Chinese) [Google Scholar]
  5. Wu Bin, Liu Chengwu, WEN Jingjing. The Optimized Algorithm for Working Parameters of the Vertical Impact Testing Machine[C]//IEEE 13th International Conference on Electronic Measurement & Instruments, Yangzhou, 2010: 424–430 [Google Scholar]
  6. Yang Yuliang Qin Junqi Di Changchun et al. Optimization Design on Waveform Generator of Gun-Power-Recoil Test Machine[J]. Journal of Vibration and Shock 2014 33 247 51 [Article] (in Chinese) [Google Scholar]
  7. Feng Guohua, Feng Zhihua. Half Sine Wave Shock-Exited Analysis Based on MATLAB[J]. Journal of Suzhou University, 2007 27(6): 30–33 [Article] (in Chinese) [Google Scholar]
  8. Lyu Jian, Yue Xiaohong, Huang Hanjun. Numerical Simulation for Half-Sine Pulse Generated by Rubber Waveform Generator[J]. China Rubber Industry, 2008, 55(1) : 15–18 [Article] (in Chinese) [Google Scholar]
  9. Gao T, Liu Q P, Ma J X, et al. Simulation and Experimental Research on Rubber Waveform Generator[C]//Key Engineering Materials Trans Tech Publications, 2016: 536–541 [Article] [Google Scholar]
  10. Wen J, Liu C, Yao H, et al. A Nonlinear Dynamic Model and Parameters Identification Method for Predicting the Shock Pulse of Rubber Waveform Generator[J]. International Journal of Impact Engineering, 2018, 120: 1–15 [Article] [CrossRef] [Google Scholar]
  11. Singiresu S Rao. Mechanical Vibrations[M]. 4th edition. Li Xinye, Zhang Minglu, Translate. Beijing, Tsinghua University Press, 2014 (in Chinese) [Google Scholar]
  12. Chen Jiazhao, Huang Minxiang, Wang Xueren, et al. Typical Constitutive Models of Rubber Materials and Their Ranges of Application[J]. Materials Review, 2015(suppl 1): 118–120 [Article] (in Chinese) [Google Scholar]
  13. Jankowski R. Nonlinear Rate Dependent Model of High Damping Rubber Bearing[J]. Bulletin of Earthquake Engineering, 2003, 1(3): 397–403 [Article] [CrossRef] [Google Scholar]
  14. Zeng Cheng, Hua Hongxing. Study on Shock Response Characteristics of Nonlinear Isolator[J]. Noise and Vibration Control, 2012(4) : 20–24 [Article] (in Chinese) [Google Scholar]
  15. Zhang Xiaohong, Zhou Lihan. Designing and Research on Rubber Spring for Vibration Equipment[J]. Cereal and Feed Industry, 1991(5): 60–64 [Article] (in Chinese) [Google Scholar]
  16. Gao Ting. Simulation and Experimental Research on Artillery Firing Impact Simulation Waveform Generator[D]. Harbin, Harbin Institute of Technology, 2014 (in Chinese) [Google Scholar]
  17. Gent A N. Engineering with Rubber: How to Design Rubber Components[M]. Munich, Carl Hanser Verlag GmbH Co KG, 2012 [CrossRef] [Google Scholar]
  18. Lee O S, Kim K J. Dynamic Compressive Deformation Behavior of Rubber Materials[J]. Journal of Materials Science Letters, 2003, 22(16): 1157–1160 [Article] [CrossRef] [Google Scholar]
  19. Bacon C. Separation of Waves Propagating in an Elastic or Viscoelastic Hopkinson Pressure Bar with Three-Dimensional Effects[J]. International Journal of Impact Engineering, 1999, 22(1): 55–69 [Article] [CrossRef] [Google Scholar]
  20. Pan Tsochien, Yang Guichnag. Nonlinear Analysis of Base-Isolated MDOF Structures[C]//11th World Conference on Earthquake Engineering, 1996 [Google Scholar]
  21. Lyu Pinghua. Design Analysis and Calculation of 100 kg Shock Testing Machine[J]. Engineering & Test, 1995(1): 12–16 [Article] (in Chinese) [Google Scholar]
  22. Shi Feng, Wang Hui, Yu Lei, et al. Thirty Case Analysis of MATLAB Intelligent Algorithm[M]. Beijing, Beihang University Press, 2011 (in Chinese) [Google Scholar]
  23. Guan Yueying, Sun Weixing, Zhang Huimin, et al. Research on Shock Rigidity Characteristics Designing and Testing Method of Non-Linear Isolators[C]//Engineering and Vibration Forum, Shanghai, 2005 (in Chinese) [Google Scholar]
  24. Tang Z Y, Wu G, Lu J Y, et al. Application of Variable Damping Hydraulic Buffer in Braking Large Mass Impact Loading Problem[C]//Applied Mechanics and Materials, 2015: 619–622 [Article] [Google Scholar]
  25. Zhao Qingwang. Theoretical Calculation of the Basic Parameters of the Shock Test Machine[J]. Journal of Vibration and Shock, 1991(2): 1–6 [Article] (in Chinese) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.