Open Access
Issue |
JNWPU
Volume 38, Number 1, February 2020
|
|
---|---|---|
Page(s) | 95 - 103 | |
DOI | https://doi.org/10.1051/jnwpu/20203810095 | |
Published online | 12 May 2020 |
- Chen Binyi, Chen Guoming. Development of High Temperature Measurement Technique for Aeroengnies[J]. Journal of Propulsion Technology, 1996, 17(1): 92–96 [Article] (in Chinese) [Google Scholar]
- Hu Zhuangqi, Liu Lirong, Jin Tao, et al. Development of the Ni-Base Single Crystal Superalloys[J]. Aeroengine, 2005, (3): 1–7 [Article] (in Chinese) [Google Scholar]
- Wang Wenge. Survey of Radiation Thermometry Technology[J]. Journal of Astronautic Metrology and Measurement, 2005, 25(4): 20xy3 24 [Article] (in Chinese) [Google Scholar]
- Xiong Qingrong, Shi Xiaojiang, Hou Minjie, et al. Surface Temperature Measurement of Turbine Nozzle Based on Temperature-Sensitive Paint[J]. Gas Turbine Experiment and Research, 2014, 27(3): 45–48 [Article] (in Chinese) [Google Scholar]
- XIONG Qingrong, Zhu Guocheng, Zhong Ming. Experimental Investigation of Temperature Measurement on the Wall of Flame Tube for a Triple Combustor[J]. Journal of Aerospace Power, 2016, 31(4): 775–779 [Article] (in Chinese) [Google Scholar]
- Lepicovsky J, SMITH F A, ZHANG L J. Thin-Film Thermocouples for Turbine Hot-Cascade Testing[R]. ISABE-7241, 1999 [Google Scholar]
- Sommerer Y, DROUIN V, NICOLAS X, et al. Uncertainty Quantification of Thermocouple Air Temperature Measurement in Highly Radiative Environment: Application to Turbofan Engine Compartment[C]//ASME Turbo Expo: Turbine Technical Conference & Exposition, 2016 [Google Scholar]
- Cao C, YAN X J. Creep/Fatigue Tests on Full Scale Hollow Turbine Blades Considering Temperature Gradient[C]//ASME Turbo Expo: Turbine Technical Conference & Exposition, 2016 [Google Scholar]
- Tougas I M, Gregory O J. Thin Film Platinum-Palladium Thermocouples for Gas Turbine Engine Applications[J]. Thin Solid Films, 2013, 539(5): 345–349 [Article] [NASA ADS] [CrossRef] [Google Scholar]
- Xu Yi, XIONG Qingrong, SHI Xiaojiang, et al. A Manufacturing Method of Thick Coating Thermocouple Sensor Based on Plasma Spraying[P]. China, 108531848 A (in Chinese) [Google Scholar]
- Xiong Qingrong, XU Yi, SHI Xiaojiang, et al. A Manufacturong Method of Thick Coatong Thermaocouple Sensor Based on Flame Spraying of Bar[P]. China, 108531843 A (in Chinese) [Google Scholar]
- Chen Yinzhi. Research on Fabrication of Thin Film Thermocouples on Nickel Base Superalloy and Related Technology[D]. Chengdu: University of Electronic Science and Technology of China, 2014(in Chinese) [Google Scholar]
- Ho K S, LIU J S, ELLIOTT T, et al. Conjugate Heat Transfer Analysis for Gas Turbine Film-Cooled Blade[C]//ASME Turbo Expo: Turbomachinery Technical Conference & Exposition, 2016 [Google Scholar]
- Nowak G, Wrólewski W. Cooling System Optimisation of Turbine Guide Vane[J]. Applied Thermal Engineering, 2009, 29: 567–572 [Article] [CrossRef] [Google Scholar]
- LIU J, Hussain S, WANG L, et al. Heat Transfer and Turbulent Flow Characteristics over Pocket Cavity in the Junction Part of an Outlet Guide Vane in a Gas Turbine[J]. Applied Thermal Engineering, 2017, 124: 831–843 [Article] [CrossRef] [Google Scholar]
- Hylton L D, MIHELC M S, TURNER E R, et al. Analytical and Experimental Evaluation of the Heat Transfer Distribution over the Surfaces of Turbine Vanes[C]//Aas/division of Dynamical Astronomy Meeting, 1983 [Google Scholar]
- Zhang H J, Zou Z P, Li Y, et al. Conjugate Heat Transfer Investigations of Turbine Vane Based on Transition Models[J]. Chinese Journal of Aeronautics, 2013, 26(4): 890–897 [Article] [CrossRef] [Google Scholar]
- Dong Ping. Research on Conjugate Heat Transfer Simulation of Aero Turbine Engine Air-Cooled Vane Dissertation[D]. Harbin: Harbin Institute of Technology, 2009(in Chinese) [Google Scholar]
- Liu Jianhua, Liu Yongbao, He Xing, et al. Analyzing of Thermal Insulation of Thermal Barrier Coatings of a Turbine Vane[J]. Aeroengine, 2013, 26(4): 890–897 [Article] (in Chinese) [Google Scholar]
- ZOU Z, Yang W, ZHANG W, et al. Numerical Modeling of Steady State Errors for Shielded Thermocouples Based on Conjugate Heat Transfer Analysis[J]. International Journal of Heat & Mass Transfer, 2018, 119: 624–639 [Article] [CrossRef] [Google Scholar]
- Yang Can, Wu Weili, Xiong Yibin, et al. Calibration Technology of High-Temperature Thermocouple for Combustor Exit of an Aero-Engine[J]. Journal of Aerospace Power, 2016, 31(4): 769–774 [Article] (in Chinese) [Google Scholar]
- China Aviation Materials Manual Commission. China Aviation Materials Manual[M]. Beijing: Standards Press of China, 2002, 585–293 (in Chinese) [Google Scholar]
- Menter F R, Langtry R B, Likki S R, et al. A Correlation Based Transition Model Using Local Variables Part 1-Model Formulation[J]. Journal of Turbomachinery, 2006, 128(3): 57–67 [CrossRef] [Google Scholar]
- Langtry R B, MENTER F R, LIKKI S R, et al. A Correlation Based Transition Model Using Local Variables Part 2-Test Cases and Industrial Applications[C]//ASME Turbo Expo: Power for Land, Sea, & Air, 2004 [Google Scholar]
- GUAN P, Ai Y T, Fei C W. An Enhanced Flow-Thermo-Structural Modeling and Validation for the Integrated Analysis of Film Cooling Nozzle Guide Vane[J]. Energies, 2019, 12(14): 2775– [Article] [CrossRef] [Google Scholar]
- Steelant J, Dick E. Modeling of Laminar-Turbulent Transitional for High Freestream Turbulence[J]. Journal of Fluids Engineering, 2001, 123: 22–30 [Article] [CrossRef] [Google Scholar]
- Zhang Junting, Cui Xiaochao, Wang Youhong. Numerical Simulation of the Flow Preliminary Development of Fluid over an Obstacle[J]. Journal of Taiyuan University of Science and Technology, 2013, 34(1): 63–68 [Article] (in Chinese) [Google Scholar]
- XU Jiahui, Xi Guannan. Study on Flow and Heat Transfer Characteristics in the Laminar Flow over a Backward-Facing Step[J]. Machinery Design & Manufacture, 2017, (4): 43–46 [Article] (in Chinese) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.