EDP Sciences logo
Submit your paper
Search
Menu
All issues Volume 42 / No 5 (October 2024) JNWPU, 42 5 (2024) 939-947 References
Open Access
Issue
JNWPU
Volume 42, Number 5, October 2024
Page(s) 939 - 947
DOI https://doi.org/10.1051/jnwpu/20244250939
Published online 06 December 2024
  1. ENGELMANN J, CHU D, DUPRAZ T, et al. Measuring the wafer temperature in CVD tools using the wireless sensarray hightemp-400 wafer[C]//Advanced Semiconductor Manufacturing Conference, 2017: 161–164 [Google Scholar]
  2. LI Z, LI H, GAN X, et al. A susceptor with a∧-shaped slot in a vertical MOCVD reactor by induction heating[J]. Journal of Semiconductors, 2014, 35(9): 092003. [Article] [CrossRef] [Google Scholar]
  3. HSU K C, YANG J Y, CHEN J Z, et al. Modeling and simulation of heat transfer characteristics of 12-inch wafer on electrostatic chuck[C]//Microsystems, Packaging, Assembly & Circuits Technology Conference, 2015: 304–307 [Google Scholar]
  4. WOO D S, HAN C, YOUN B D, et al. Thermal modelling and design of dynamically-controlled heater plates for high temperature processing of 300 mm wafers[J]. Journal of Mechanical Science and Technology, 2019, 33(10): 5009–5016. [Article] [CrossRef] [Google Scholar]
  5. TAY A, CHUA H T, YUHENG W, et al. Modeling and real-time control of multizone thermal processing system for photoresist processing[J]. Industrial & Engineering Chemistry Research, 2013, 52(13): 4805–4814 [CrossRef] [Google Scholar]
  6. LING K V, HO W K, WU B F, et al. Multiplexed MPC for multizone thermal processing in semiconductor manufacturing[J]. IEEE Trans on Control Systems Technology, 2010, 18(6): 1371–1380. [Article] [CrossRef] [Google Scholar]
  7. HONG S J. Fabrication of planar heating chuck using nichrome thin film as heating element for PECVD equipment[J]. Electronics, 2021, 10(20): 2535. [Article] [CrossRef] [Google Scholar]
  8. ZHANG Zeming, HUANG Liping, ZHAO Jicong, et al. Simulation of temperature control for electrostatic chuck in plasma etching[J]. Chinese Journal of Vacuum Science and Technology, 2015, 35(10): 1196–1202 (in Chinese) [Google Scholar]
  9. SUN Wei, YAO Xiaoqiong. Temperature control in ultra-precision machining of silicon wafer surface[J]. Journal of North China Institute of Aerospace Engineering, 2017, 27(4): 20–22 (in Chinese) [Google Scholar]
  10. XU Longquan, FANG Song, TANG Zihan, et al. Research on heating uniformity of MOCVD heating device[J]. Chinese Journal of Luminescence, 2017, 38(2): 220–225 (in Chinese) [CrossRef] [Google Scholar]
  11. XU Zhiming, CHENG Wenlong, NING Dongpo, et al. Research on a new high precision temperature control method[J]. Journal of Northwestern Polytechnical University, 2019, 37: 8–14. [Article] (in Chinese) [Google Scholar]
  12. YANG Kang, DIAN Songyi, GUO Bin, et al. Adaptive fuzzy predictive control of thermal barrier coating heating system[J]. Science Technology and Engineering, 2022, 22(19): 8378–8386 (in Chinese) [Google Scholar]
  13. YU Ping, SUN Wenxu, XIU Xiangqian, et al. Design of vertical HVPE control system forgrowing GaN based on sapphire substrate[J]. Micronanoelectronic Technology, 2022, 59(5): 458–464 (in Chinese) [Google Scholar]
  14. LI Rui, LI Ning, LI Yulong, et al. A new heating block control system based on PID regulations for continuously changed heating rates[J]. Journal of Chinese Agricultural Mechanization, 2022, 43(2): 84–92 (in Chinese) [Google Scholar]
  15. LIU Zengshui, CHEN Yudi. High precision temperature controller and its parameter tuning are realized by using the principle of time delay filter[J]. Electronic Design Engineering, 2021, 29(8): 106–110 (in Chinese) [Google Scholar]
  16. YOU Qing, HU Qingkun, ZHANG Qianwu. Design and application of optical module thermal control system based on PID[J]. Industrial Control Computer, 2022, 35(8): 54–56 (in Chinese) [Google Scholar]
  17. HE Ziming, NIU Jiangchuan, ZHANG Jing. Temperature control of evaporation source basedon Smith variable universe fuzzy adaptive PID[J]. Control Engineering of China, 2021, 28(7): 1308–1314 (in Chinese) [Google Scholar]
  18. CAO Fali, FU Yuanming, WU Jiangtao. Temperature control system based on the multi-stage integral separation PID algorithm[J]. Control Engineering of China, 2017, 24(6): 1107–1112 (in Chinese) [Google Scholar]
  19. LEI Xiangxiao, TANG Chunxia. Bath temperature control system based on adaptive fuzzy PID[J]. Plating & Finishing, 2021, 43(8): 35–38 (in Chinese) [Google Scholar]
  20. WANG Chao, SUN Wenxu, MA Xiaojing, et al. Temperature control system of HVPE growth equipment based on fuzzy control[J]. Chinese Journal of Engineering Design, 2020, 27(6): 765–770 (in Chinese) [Google Scholar]
  21. ZHU Chenglin, HAN Xiaoquan, FENG Zebin, et al. Temperature control system of excimer laser based on Smith prediction compensation[J]. Chinese Journal of Quantum Electronics, 2018, 35(5): 533–538 (in Chinese) [Google Scholar]
  22. YANG Biao, LIU Zhibang, LI Xinpei, et al. Temperature uniformity optimization of multi-mode stirrer microwave heating system based on consensus algorithm[J]. Control and Decision, 2021(12): 36 (in Chinese) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.