Open Access
Issue
JNWPU
Volume 44, Number 1, February 2026
Page(s) 169 - 176
DOI https://doi.org/10.1051/jnwpu/20264410169
Published online 27 April 2026
  1. Kan Wenxing, Chu Enyi, Liu Wei, et al. A review on MEMS safety and arming devices for micro-initiation system[J]. Chinese Journal of Energetic Materials, 2022, 30(1): 78–94 (in Chinese) [Google Scholar]
  2. Lou Wenzhong, Zhao Yueceng, Feng Hengzhen, et al. Reliability analysis on MEMS S & A device based on Bayesian network[J]. Transaction of Beijing Institute of Technology, 2021, 41(9): 952–960 (in Chinese) [Google Scholar]
  3. Sun Yi, Lou Wenzhong, Feng Hengzhen, et al. Silicon based MEMS safety & arming device design for small-caliber ammunition[J]. Transaction of Beijing Institute of Technology, 2021, 41(5): 501–506 (in Chinese) [Google Scholar]
  4. Cheng Jianjian, Nie Weirong, Zhou Zhijian, et al. Multi-axial elastic coefficient analysis of planar S-shaped micro-spring[J]. Instrument Technique and Sensor, 2014(4): 4–6 (in Chinese) [Google Scholar]
  5. Wang Xujian, Wang Xinjie, Li Feng. Design and driving characteristics of duplex piezoelectric actuator for fuze[J]. Journal of Harbin Institute of Technology, 2024, 56(8): 135–144 (in Chinese) [Google Scholar]
  6. Ren Yanfei. Study on reliability of fuzed MEMS micro-spring[J]. Journal of North Central University of China, 2014, 35(2): 106–110 (in Chinese) [Google Scholar]
  7. Wang Zhao. Reliability study of MEMS microspring for typical fuzes[D]. Taiyuan: North Central University of China, 2012. (in Chinese) [Google Scholar]
  8. Sui Linghe, Dai Xuhan, Wang Peihong, et al. Simulation and study of nonlinear mechanical properties for MEMS Ni planar springs[J]. MEMS Device & Technology, 2010, 47(12): 736–741 (in Chinese) [Google Scholar]
  9. Qin Y, Chen L, Hao Y, et al. A study on the elastic coefficients of setback micro-springs for a MEMS safety and arming device[J]. Microsystem Technologies, 2020, 26(2): 583–593. [Article] [Google Scholar]
  10. Li H, Guo C, Li Y, et al. Deformation characteristics of MEMS microspring under static and shock loads[J]. Microsystem Technologies, 2016, 22(12): 2949–2960. [Article] [Google Scholar]
  11. Sun Chengcheng, Ji Yaping, Wang Xiaoxia, et al. Study on stiffness of MEMS spring with variable section width in W-type[J]. Modern Manufacturing Technology and Equipment, 2021, 57(11): 20–22 (in Chinese) [Google Scholar]
  12. Cheng Jianjian, Nie Weirong, Zhou Zhijian, et al. Study of planar micro-spring performance comparison[J]. Machine Building and Automation, 2014, 43(6): 14–17 (in Chinese) [Google Scholar]
  13. Cheng Jianjian, Nie Weirong, Zhou Zhijian, et al. Elastic coefficient analysis of planar s-shaped micro equal line-width and gradient line-width spring[J]. Machine Building and Automation, 2014, 43(6): 69–71 (in Chinese) [Google Scholar]
  14. Xie Yushan, Chen Zhengguang, Zhang Yinghao, et al. Dynamic response of MEMS micro-spring under the condition of high overload[J]. Journal of Detection & Control, 2025, 47(6): 46–55 (in Chinese) [Google Scholar]
  15. Hosmer D W Jr, Lemeshow S, Sturdivant R X. Applied logistic regression[M]. Hoboken, New Jersey: John Wiley & Sons, 2013 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.