Open Access
Volume 37, Number 4, August 2019
Page(s) 643 - 649
Published online 23 September 2019
  1. Hu Zhengyun, Li Manfu, Xie Lansheng. Finite Element Simulation of Residual Stress Field in TB6 Titanium Alloy Induced by Laser Shock Peening and Shot Peening[J]. Journal of Aeronautical Materials, 2013, 33(4): 37–42 [Article] [Google Scholar]
  2. Granados-Alejo V, Rubio-Gonzalez C, Vazquez-Jimenez C A, et al. Influence of Specimen Thickness on the Fatigue Behavior of Notched Steel Plates Subjected to Laser Shock Peening[J]. Optics & Laser Technology, 2018, 101531–544 [Article] [NASA ADS] [CrossRef] [Google Scholar]
  3. Meng Xiankai, Zhou Jianzhong, Su Chun, et al. Residual Stress Relaxation and Its Effects on the Fatigue Properties of Ti6Al4V Alloy Strengthened by Warm Laser Peening[J]. Materials Science & Engineering A, 2017, 680: 297–304 [Article] [CrossRef] [Google Scholar]
  4. Kattoura M, Mannava S R, Dong Q, et al. Effect of Laser Shock Peening on Elevated Temperature Residual Stress, Microstructure and Fatigue Behavior of ATI 718Plus Alloy[J]. International Journal of Fatigue, 2017, 102: 121–134 [Article] [CrossRef] [Google Scholar]
  5. Jiang Yinfang, Peng Taotao, Yu Wenjun, et al. Influence of Laser Shock Peening on Fatigue Life of Titanium Alloy Rods[J]. Laser and Infrared, 2017, 47(9): 1108–1112 [Article] (In chinese) [Google Scholar]
  6. Umapathi A, Swaroop S. Deformation of Single and Multiple Laser Peened TC6 Titanium Alloy[J]. Optics Laser Technology, 2018, 100: 309–316 [Article] [NASA ADS] [CrossRef] [Google Scholar]
  7. Shen X, Shukla P, Nath S, et al. Improvement in Mechanical Properties of Titanium Alloy(Ti-6Al-7Nb) Subject to Multiple Laser Shock Peening[J]. Surface & Coatings Technology, 2017, 327: 101–109 [Article] [CrossRef] [Google Scholar]
  8. Chen Ruifang, Sang Yi, Wu Jingwei, et al. Experiment and Numerical Simulation of Laser Shock Processing in 7050 Aluminum Alloy[J]. Journal of Jiangsu University, 2009, 30(2): 113–117 [Article] (In chinese) [Google Scholar]
  9. Huang Shu, Sheng Jie, Tan Wensheng, et al. Grain Rearrangement and Fatigue Property of IN718 Alloy Strengthened by Laser Peening[J]. Acta Optica Sinica, 2017(4): 225–233 [Article] (In chinese) [Google Scholar]
  10. Mostafa A M, Hameed M F, Obayya S S. Effect of Laser Shock Peening on the Hardness of AL-7075 Alloy[EB/OL]. (2017-08-05)[2019-06-27]. [Article] [Google Scholar]
  11. Zhang Xingquan, Zhang Yongkang, Gu Yongyu, et al. Numerical Simulation and Experimental Investigation on Laser Shock Processing[J]. Transactions of the Chinese Society for Agricultural Machinery, 2007, 38(12): 181-184 [Article] (In chinese) [Google Scholar]
  12. Dorman M, Toparli M B, Smyth N, et al. Effect of Laser Shock Peening on Residual Stress and Fatigue Life of Clad 2024 Aluminium Sheet Containing Scribe Defects[J]. Materials Science & Engineering A, 2012, 548(3): 142-151 [Article] [CrossRef] [Google Scholar]
  13. Zhou Jianzhong, Zuo Lidang, Huang Shu, et al. Analysis on Mechanical Property of 6061-T6 Aluminum Alloy by Laser Shot Peening Based on Strain Rate[J]. Chinese Journal of Lasers, 2012, 39(5): 101-106 [Article] (In chinese) [Google Scholar]
  14. Coratella S, Sticchi M, Toparli M B, et al. Application of the Eigenstrain Approach to Predict the Residual Stress Distribution in Laser Shock Peened AA7050-T7451 Samples[J]. Surface & Coatings Technology, 2015, 273(1): 39-49 [Article] [CrossRef] [Google Scholar]
  15. Vasu A, Grandhi R V Effects of Curved Geometry on Residual Stress in Laser Peening[J]. Surface and Coatings Technology, 2013, 218 71-79 [Article] [CrossRef] [Google Scholar]
  16. Yang C, Hodgson P D, Liu Q, et al. Geometrical Effects on Residual Stresses in 7050-T7451 Aluminum Alloy Rods Subject to Laser Shock Peening[J]. Journal of Materials Processing Technology, 2008, 201(1): 303-309 [Article] [NASA ADS] [CrossRef] [Google Scholar]
  17. Fabbro R, Peyre P, Berthe L, et al. Physics and Applications of Laser-Shock Processing[J]. Proceedings of SPIE-The International Society for Optical Engineering, 2000, 3888(6): 155-164 [Article] [NASA ADS] [Google Scholar]
  18. Hua Guoran, Jiang Suzhou, Cao Yupeng, et al. Numerical Simulation of Residual Stress Hole on 7050 Aluminum Alloy Under Laser Shock[J]. Heat Treatment of Metals, 2017, 42(7): 154-157 [Article] (In chinese) [Google Scholar]
  19. Zhang Yongkang, Zhou Lichun, Ren Xudong, et al. Experiment and Finite Element Analysis on Residual Stress Field in Laser Shock Processing TC4 Titanium Alloy[J]. Journal of Jiangsu University, 2009, 30(1): 10-13 [Article] (In chinese) [Google Scholar]
  20. Gu Yongyu, Zhang Yongkang, Zhang Xingquan, et al. Theoretical Study on the Influence of the Overlay on the Pressure of Laser Shock Wave in Photomechanics[J]. Acta Physica Sinica, 2006, 55(11): 5885-5891 [Article] (In chinese) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.