Open Access
Volume 39, Number 6, December 2021
Page(s) 1240 - 1248
Published online 21 March 2022
  1. Teng Zhihui, Bai Guangchen. Structural reliability analysis of an aeroengine compressor disk, Aeroengine, 2006, 32(2): 34–37 [Article] (in Chinese) [Google Scholar]
  2. Zhao Hongli, Liu Yuwen. Forecasting for aero-engine failure risk based on Monte Carlo simulation[J]. Journal of Beijing University of Aeronautics and Astronautics, 2015, 41(3): 545–550 [Article] (in Chinese) [Google Scholar]
  3. Narayanan G, Rezaei K, Nackenhorst U. Fatigue life estimation of aero engine mount structure using monte carlo simulation[J]. International Journal of Fatigue, 2016(83): 53–58 [Article] [Google Scholar]
  4. Yang Zhou, Du Zunling, Zhang Yimin. Reliability-based sensitivity design of an aero-engine turbine disk[J]. Journal of Northeastern University, 2011, 32(8): 1161–1164 [Article] (in Chinese) [Google Scholar]
  5. Zhang Fei. Sensitivity analysis on fatigue reliability of a turbine disk using finite element method[D]. Shenyang: Northeastern University, 2009 (in Chinese) [Google Scholar]
  6. Bai Bing, Zhang Qinghua, Li Qiao. Regression analysis-prediction algorithm for second-order second-moment reliability index evaluation[J]. Engineering Mechanics, 2013, 30(10): 219–226 [Article] (in Chinese) [Google Scholar]
  7. Gao Yang, Bai Guangchen, Yu Linchong. Fatigue reliability analysis of turbine disk based on RBF neural network[J]. Journal of Machine Design, 2009, 26(5): 8–10 [Article] (in Chinese) [Google Scholar]
  8. 刘佳奇, 冯蕴雯, 路成, 等. 基于智能神经网络的航空发动机运行安全分析[J/OL]. (2021-04-12)[2021-12-13]. [Article] (in Chinese) [Google Scholar]
  9. Ma Xiaojun, Ren Shuhong, Zuo Hongfu, et al. Prediction method of aero-engine life on wing based on LS-SVM algorithm and performance reliability[J]. Journal of Traffic and Transportation Engineering, 2015, 15(3): 92–100 [Article] (in Chinese) [Google Scholar]
  10. Zhang C Y, Yuan Z S, Wang Z ,et al. Probabilistic fatigue/creep optimization of turbine bladed disk with fuzzy multi-extremum response surface method[J]. Materials(Basel), 2019, 12(20): 3367 [Article] [Google Scholar]
  11. Zhang C Y, Wang A H, Sun T, et al. Reliability analysis for the gear of power assisting cycle with multi-extremum response surface method[C]//4th International Conference on Mechanics and Mechatronics Research, 2017 [Google Scholar]
  12. Bai B, Zhang W, Li B T, et al. Application of probabilistic and non probabilistic hybrid reliability analysis based on dynamic substructural extremum response surface decoupling method for a blisk of the aeroengine[J]. International Journal of Aerospace Engineering, 2017, 2017: 20 [Article] [Google Scholar]
  13. Li Baoyu, Zhang Leigang, Qiu Qunhai, et al. An advanced first order and second moment method based on gradient analytical solution of Kriging surrogate model[J]. Acta Aeronautica et Astronautica Sinica, 2019, 40(5): 155–162 [Article] (in Chinese) [Google Scholar]
  14. Liu Zhan, Zhang Jianguo, Wang Cancan, et al. Hybrid structure reliability method combining optimized Kriging model and importance sampling[J]. Acta Aeronautica et Astronautica Sinica, 2013, 34(6): 1347–1355 [Article] (in Chinese) [Google Scholar]
  15. Kaymaz I. Application of Kriging method to structural reliability problems[J]. Structural Safety, 2005(27): 133–151 [Article] [CrossRef] [Google Scholar]
  16. Lu Cheng. Reliability design of complex structure/mechanism based on advanced surrogate models[M]. Xi'an: Northwestern Polytechnical University, 2020 (in Chinese) [Google Scholar]
  17. Jin Min, Lu Huaxiang. A multi-level hybrid algorithm based on genetic algorithm and particle swarm optimization[J]. Control Theory & Applications, 2013, 30(10): 1231–1238 [Article] (in Chinese) [Google Scholar]
  18. Zhou Changcong, Ji Mengyao, Zhang Yishang, et al. Mechanism reliability and sensitivity analysis of landing gear under multiple failure modes[J]. Journal of Northwestern Polytechnical University, 2021, 39(1): 46–54 [Article] (in Chinese) [NASA ADS] [CrossRef] [EDP Sciences] [Google Scholar]
  19. Lu C, Feng Y W, Liem R P, et al. Improved Kriging with extremum response surface method for structural dynamic reliability and sensitivity analyses[J]. Aerospace Science and Technology, 2018(76): 164–175 [Article] [CrossRef] [Google Scholar]
  20. Fei C W, Bai G C. Extremum selection method of random variable for nonlinear dynamic reliability analysis of turbine blade deformation[J]. Propulsion and Power Research, 2012, 1(1): 58–63 [Article] [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.