Open Access
Volume 42, Number 2, April 2024
Page(s) 222 - 231
Published online 30 May 2024
  1. HOOGENDIJK A R. Knowledge engineering in high lift design: the ICAD flap kinematic tool[D]. Delft: Delft University of Technology, 2004 [Google Scholar]
  2. ZACCAI D. Design framework for trailing edge high-lift systems: a knowledge based engineering application[D]. Delft: Delft University of Technology, 2014 [Google Scholar]
  3. RECKSIEK M. Advanced high lift system architecture with distributed electrical flap actuation[C]//Aviation System Technology Workshop, 2009 [Google Scholar]
  4. SCHOLZ P, MAHMOOD S, CASPER M, et al. Design of active flow control at a drooped spoiler configuration[R]. AIAA-2013-2518, 2013 [Google Scholar]
  5. JIE Z, SUN Z, SONG Q. Analysis of flap mechanism reliability[C]//International Conference on Mechatronics Engineering & Information Technology, 2017 [Google Scholar]
  6. ZHANG Lei, FENG Yunweng, XUE Xiaofeng, et al. Reliability analysis of straight track flap movement mechanism[J]. Mechanical Science and Technology for Aerospace Engineering, 2012, 31(7): 1189–1191 [Article] (in Chinese) [Google Scholar]
  7. YU Tianxiang, ZHUANG Xinchen, SONG Bifeng, et al. Integrated wear life prediction method of multiple joints in an aircraft linkage mechanism[J]. Acta Aeronautica et Astronautica Sinica, 2022, 43(8): 133–142 [Article] (in Chinese) [Google Scholar]
  8. FENG Yunweng, HE Zhiyu, TANG Jiaqiang, et al. Dynamics simulation research on fault conditions of deflecting to airflow flap mechanism of civil aircraft[J]. Advances in Aeronautical Science and Engineering, 2023, 14(4): 85–93 [Article] (in Chinese) [Google Scholar]
  9. ZHONG Yunlong, ZHANG Zhongwen, ZHANG Dapeng, et al. Reliability simulation analysis of a flap motion mechanism based on failure modes[J]. Electronic Product Reliability and Environmental Testing, 2019, 37(5): 1–7 [Article] (in Chinese) [Google Scholar]
  10. FENG Y W, HE Z Y, XUE X F, et al. Dynamic simulation of complex multi-hinge space flap mechanism[C]//The 12th Asia Conference on Mechanical and Aerospace Engineering, 2022 [Google Scholar]
  11. ZHOU J, SUN Z, SONG Q. Analysis of flap mechanism reliability[C]//Proceedings of the 2nd International Conference on Mechatronics Engineering and Information Technology, 2017 [Google Scholar]
  12. MUKRAS S, KIM N H, MAUNTLER N A, et al. Analysis of planar multibody systems with revolute jointwear[J]. Wear, 2010, 268(5/6): 643–652 [Google Scholar]
  13. GENG X Y, LI M, LIU Y F, et al. Non-probabilistic kinematic reliability analysis of planar mechanisms with non-uniform revolute clearance joints[J]. Mechanism and Machine Theory, 2019, 140: 413–433 [Article] [Google Scholar]
  14. ZHU Aibin, HE Shengli, ZOU Chao, et al. Dynamic wear analysis of clearance joint considering contact stiffness[J]. Journal of Xi'an Jiaotong University, 2016, 50(5): 12–18 [Article] (in Chinese) [Google Scholar]
  15. LAI X M, HE H, LAI Q F, et al. Computational prediction and experimental validation of revolute joint clearance wear in the low-velocity planar mechanism[J]. Mechanical Systems and Signal Processing, 2017, 85: 963–976 [Article] [Google Scholar]
  16. FANG Xin. Conformal contact model and wear life prediction for spherical plain bearings[D]. Changsha: National University of Defense Technology, 2014: 14–31 (in Chinese) [Google Scholar]
  17. LIU Yao. A new microcontact model of conformal contact and wear life prediction for spherical plain bearings based on fractal theory[D]. Changsha: National University of Defense Technology, 2016: 26–45 (in Chinese) [Google Scholar]
  18. YUAN Junya, YANG Mingming, LI Peilong, et al. Progress research on the tribology of fabric liner for self-lubricating joint bearings[J]. Tribology, 2021, 41(2): 280–292 [Article] (in Chinese) [Google Scholar]
  19. ZHANG Qinglin. Simulation of vehicle dynamics and optimization of suspension parameters based on rigid-flexible coupling model[D]. Chongqing: Chongqing University of Technology, 2015 (in Chinese) [Google Scholar]
  20. LIANG Li, JI Xiaofei, MENG Zhaokang, et al. Optimization of landing gear door based on rigid-flexible coupling dynamic simulation[J]. Composites Science and Engineering, 2021(6): 45–51 [Article] (in Chinese) [Google Scholar]
  21. FLORES P. Modeling and simulation of wear in revolute clearance joints in multibody systems[J]. Mechanism and Machine Theory, 2009, 44(6): 1211–1222 [Google Scholar]
  22. WANG G X, LIU H Z. Dynamic analysis and wear prediction of planar five-bar mechanism considering multi-flexible links and multi-clearance joints[J]. Journal of Tribology, 2017, 139(5): 051606 [Google Scholar]
  23. ZHU A B, HE S L, ZOU C, et al. The effect analysis of contact stiffness on wear of clearance joint[J]. Journal of Tribology, 2017, 139(3): 031403 [Google Scholar]
  24. BORISENKO V, LEORO J, DIDENKO A. Main rotor blade modeling approaches comparison[C]//International Conference on Information Technologies and Mathematical Modelling, 2021 [Google Scholar]
  25. WANG Xuanguo, YAN Xinping, LI Taosheng, et al. Research status of wear numerical simulation technology[J]. Tribology, 2004(2): 188–192 [Article] (in Chinese) [Google Scholar]
  26. KIM N H, WON D, BURRIS D, et al. Finite element analysis and experiments of metal/metal wear in oscillatory contacts[J]. Wear, 2005, 258: 1787–1793 [Google Scholar]
  27. LI Jing, YIN Jun. On the wear simulation of self-lubrication bearings[J]. Lubrication Engineering, 2018, 43(11): 120–124 [Article] (in Chinese) [Google Scholar]
  28. LU Jianjun, QIU Ming, LI Yingchun. Wear life model for self-lubricating radial spherical plain bearings[J]. Journal of Mechanical Engineering, 2015, 51(11): 56–63 [Article] (in Chinese) [Google Scholar]
  29. YU Ruifeng, DIAO Binbin, GAO Deli. A calculation model for improving the relative borehole uncertainty based on the least square method in relief well[J]. Journal of Petroleum Science and Engineering, 2022, 217: 70–76 [Google Scholar]
  30. YANG Yuqian. Research on performance degradation law and reliability modeling of typical components of civil aircraft[D]. Xi'an: Northwestern Polytechnical University, 2015: 67–69 (in Chinese) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.