Open Access
Issue
JNWPU
Volume 36, Number 1, February 2018
Page(s) 66 - 73
DOI https://doi.org/10.1051/jnwpu/20183610066
Published online 18 May 2018
  1. Ireman T, Ranvik T, Eriksson I. On Damage Development in Mechanically Fastened Composite Laminates[J]. Composite Structures, 2000, 49(2) : 151-171 10.1016/S0263-8223(99)00130-0 [CrossRef] [Google Scholar]
  2. Lawlor V P, Mccarthy M A, Stanley W F. An Experimental Study of Bolt-Hole Clearance Effects in Double-Lap, Multi-Bolt Composite Joints[J]. Composite Structures, 2005, 71(2) : 176-190 10.1016/j.compstruct.2004.09.025 [CrossRef] [Google Scholar]
  3. Xiao Y, Ishikawa T. Bearing Strength and Failure Behaviour of Bolted Composite Joints (Part Ⅱ:Modelling and Simulation)[J]. Compos Sci Technol, 2005, 65(78) : 1032-1043[Article] [CrossRef] [Google Scholar]
  4. Zhou Y H, Hamed Y N, Chi H, et al. A Three Dimensional Implicit Finite Element Damage Model and its Application to Single-Lap Multi-Bolt Composite Joints with Variable Clearance[J]. Composite Structures, 2015, 131(11) : 1060-1072[Article] [CrossRef] [Google Scholar]
  5. Santiuste C, Barbero E, Miguelez M H. Computational Analysis of Temperature Effect in Composite Bolted Joints for Aeronautical Applications[J]. Reinf Plast Compos, 2011, 30(1) : 3-11 10.1177/0731684410385034 [CrossRef] [Google Scholar]
  6. Camanho P P, Matthews F L. A Progressive Damage Model for Mechanically Fastened Joints in Composite Laminates[J]. Composite Material, 1999, 33(24) : 2248-2280 10.1177/002199839903302402 [NASA ADS] [CrossRef] [Google Scholar]
  7. Wang Danyong, Wen Weidong, Cui Haitao. Three-Dimensional Progressive Damage Analysis of Single Fastener Joints in Composite Laminates[J]. Acta Materiae Compositae Sinica, 2005, 22(6) : 168-174 (in Chinese)[Article] [Google Scholar]
  8. Zhu Zhiyi. Research on Bearing Strength of Bolted Joints between Thick Composite Laminates[D]. Nanjing, Nanjing University of Aeronautics and Astronautics, 2014(in Chinese) [Google Scholar]
  9. Tate M B, Rosenfeld S J. Preliminary Investigation of the Loads Carried by Individual Bolts in Bolted Joints[R]. NACA TN-1051IR-1946 [Google Scholar]
  10. Nelson W D, Bunin B L, Hart-Smith L J. Critical Joints in Large Composite Aircraft Structure[R]. NASA CR-3710-1983 [Google Scholar]
  11. McCarthy M A, McCarthy C T, Padhi G S. A Simple Method for Determining the Effects of Bolt-Hole Clearance on Load Distribution in Single-Column, Multi-Bolt Composite Joints[J]. Composite Structures, 2006, 73(1) : 78-87 10.1016/j.compstruct.2005.01.028 [CrossRef] [Google Scholar]
  12. McCarthy C T, Gray P J. An Analytical Model for the Prediction of Load Distribution in Highly Torqued Multi-Bolt Composite Joints[J]. Composite Structures, 2011, 93(2):287-298 10.1016/j.compstruct.2010.09.017 [CrossRef] [Google Scholar]
  13. Xie Zonghong, Li Xiang, Yang Linya, et al. A Calculation Method for Load Transfer in Bolted Repair of Composite Laminates Based on Spring-Mass Mode[J]. Acta Aeronautica et Astronautica Sinica, 2016, 37(12):3742-3751 (in Chinese)[Article] [Google Scholar]
  14. Olmedo A, Santiuste C, Barbero E. An Analytical Model for Predicting the Stiffness and Strength of Pinned-Joint Composite Laminates[J]. Composites Science and Technology, 2014, 90(1):67-73[Article] [CrossRef] [Google Scholar]
  15. Xie M J. Joints for Composite Materials Book[M]. Shanghai, Shanghai Jiaotong University Press, 2011:174-176 (in Chinese) [Google Scholar]
  16. Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates[S]. ASTM-D5961/D5961M-13-B, 2013 [Google Scholar]
  17. Mcsarthy C T, O'higgins R M, Frizzell R M. A Cubic Spline Implementation of Non-Linear Shear Behaviour in Three-Dimensional Progressive Damage Models for Composite Laminates[J]. Composite Structures, 2010, 92(1):173-181 10.1016/j.compstruct.2009.07.025 [CrossRef] [Google Scholar]
  18. Sharos P A, Egan B, Mcsarthy C T. An Analytical Model for Strength Prediction in Multi-Bolt Composite Joints at Various Loading Rates[J]. Composite Structures, 2014, 116(1):300-310[Article] [CrossRef] [Google Scholar]
  19. Mcsarthy C T, Mccarthy M A, Stanley W F, et al. Experiences with Modeling Friction in Composite Bolted Joints[J]. Journal of Composite Material, 2005, 39: 1881-1908 10.1177/0021998305051805 [NASA ADS] [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.