Open Access
Volume 38, Number 6, December 2020
Page(s) 1291 - 1298
Published online 02 February 2021
  1. Tao Chunhu, Zhong Peidao, Wang Renzhi, et al. Failure and Prevention of Aero-Engine Rotating Component[M]. Beijing: National Defense Industry Press, 2000 (in Chinese) [Google Scholar]
  2. Chen Guang. A Hidden Defect in the Turbine Disk Result in a Boeing 767 Burned[J]. Aerospace Power, 2019 (6): 56– 58 (in Chinese) [Google Scholar]
  3. Phillips P J, Unocic R R, Mills M J. Low Cycle Fatigue of a Polycrystalline Ni-Based Superalloy:Deformation Substructure Analysis[J]. International Journal of Fatigue, 2013, 57: 50– 57 [CrossRef] [Google Scholar]
  4. Abikchi M, Billot T, CRÉPIN J, et al. Fatigue Life and Initiation Mechanisms in Wrought Inconel 718 DA for Different Microstructures[C]//13th International Conference on Fracture, Beijing, China, 2013 [Google Scholar]
  5. Sweeney C A, Vorster W, Leen S B, et al. The Role of Elastic Anisotropy, Length Scale and Crystallographic Slip in Fatigue Crack Nucleation[J]. Journal of the Mechanics and Physics of Solids, 2013, 61 (5): 1224– 1240 [CrossRef] [Google Scholar]
  6. Qin Heyong, Chen Gang, Shen Wentao, et al. Analysis of High Temperature Low Cycle Fatigue Properties for GH4698 Alloy[J]. Metal Forming Equipment and Manufacturing Technology, 2014, 49 (6): 92– 96 (in Chinese) [Google Scholar]
  7. Sweeney C A, O'brien B, Dunne F P E, et al. Strain-Gradient Modelling of Grain Size Effects on Fatigue of CoCr Alloy[J]. Acta Materialia, 2014, 78: 341– 353 [CrossRef] [Google Scholar]
  8. Wang Huan, Yuan Chao, Guo Jianting, et al. Fatigue Crack Propagation Behavior of GH4698 Alloy[J]. Chinese Journal of Nonferrous Metals, 2015, 25 (1): 23– 29 (in Chinese) [Google Scholar]
  9. Zheng Xiaomei, Sun Yantao, Yang Xingyu, et al. Design of Low Cycle Fatigue Simulating Specimen for Bolt Holes of a Turbofan Engine High Pressure Turbine Disc[J]. Journal of Aerospace Power, 2018, 33 (10): 2351– 2358 (in Chinese) [Google Scholar]
  10. Hou Junling, Li Qun, Zuo Hong. Multiple Crack Growth of Nickel Base Alloy Based on M-Integral[C]//2018 National Conference on Solid Mechanics, Harbin, 2018 (in Chinese) [Google Scholar]
  11. Zhu Qiang. High Temperature Low Cycle Fatigue Behavior and Fracture Mechanism of GH4698 Nickel-Based Alloy[D]. Harbin: Harbin Institute of Technology, 2016 (in Chinese) [Google Scholar]
  12. Liu Hongbin, Chen Wei, Liu Lin. Prediction Method and Verification of Fatigue Life for a Turbine Disk with Bolt Hole[J]. Journal of Northwestern Polytechnical University, 2019, 37 (4): 744– 750 (in Chinese) [CrossRef] [Google Scholar]
  13. Zhao Rongguo. Probabilistic Fatigue Crack Propagation Life Prediction of GH4133B Superalloy Used in Turbine Disk of Aero-Engine[J]. Journal of Mechanical Engineering, 2011, 47 (18): 55– 65 (in Chinese) [CrossRef] [Google Scholar]
  14. CLÁUDIO R A, Baptista R, Infante V, et al. Life Prediction Using Finite Elements in Complex Geometries[C]//Eighth Portuguese Conference on Fracture, 2002 [Google Scholar]
  15. Beres W, Dudzinski D, Murzionak A. Fatigue Crack Growth Rate Evaluation in a Turbine Disc after Spin Rig Testing[C]//12th International Conference on Fracture, Ottawa, 2009 [Google Scholar]
  16. Das P S. Three-Dimensional Structural Evaluation of a Gas Turbine Engine Rotor[C]//ASME Turbo Expo 2014: Turbine Technical Conference and Exposition, Germany, 2014: 16–20 [Google Scholar]
  17. Lu Shan, Huang Qiqing. New Method and Application of Damage Tolerance Analysis of Pin Holes in Turbine Disks[J]. Journal of Aerospace Power, 2002, 17 (1): 87– 92 (in Chinese) [Google Scholar]
  18. Liu Chengli, Lyu Zhenzou, Xu Youliang. Reliability Analysis for the Crack Growth of Powder Metallurgy Turbine Disk[J]. Rare Metal Materials and Engineering, 2006, 35 (2): 232– 236 (in Chinese) [Google Scholar]
  19. Tao Chunhu, Xi Niansheng, Zhang Weifang. Resent Development of Fractographic Restrostimationon Determining Fatigue Stress[J]. Journal of Aeronautical Materlals, 2000, 30 (3): 158– 163 (in Chinese) [Google Scholar]
  20. Hutchinson J W. Crack Tip Shielding by Microcracking in Brittle Solids[J]. Aeta Metall, 1987, 35: 1605– 1619 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.