Open Access
Issue
JNWPU
Volume 37, Number 1, February 2019
Page(s) 1 - 6
DOI https://doi.org/10.1051/jnwpu/20193710001
Published online 03 April 2019
  1. Qin Fei, LÜ Xiang, Liu Peijin, et al. Research Status and Perspective of Rocket Based Combined Cycle Propulsion System[J]. Journal of Propulsion Technology, 2010, 31(6): 660-665 (in Chinese) [Article] [Google Scholar]
  2. Wang Guohui, Wang Xiaojun, Yang Yong, et al. Research Status about Rocket Based Combined Cycle(RBCC) Propulsion System[J]. Journal of Solid Rocket Technology, 2003, 26(3): 1-3 (in Chinese) [Article] [Google Scholar]
  3. Jing T T, He G Q, Lin B B, et al. Thermal Analysis of RBCC Engine at Ejector, Ramjet and Scramjet Modes[C]//Proceedings of the AIAA Propulsion and Energy Forum, Salt Lake City, 2016: 4913 [Google Scholar]
  4. Zhao Guozhu. Research and application of Regenerative Cooling Flow and Heat Transfer of Hydrocarbon Fuels for Scramjet[D]. Xi'an, Northwestern Polytechnical University, 2015 (in Chinese) [Google Scholar]
  5. Wang J Y. Pressure Drop and Flow Distribution in Parallel-Channel Configurations of Fuel Cells:Z-Type Arrangement[J]. International Journal of Hydrogen Energy, 2010, 35(11): 5498-5509 [Article] [CrossRef] [Google Scholar]
  6. Wang J Y. Pressure Drop and Flow Distribution in Parallel-Channel Configurations of Fuel Cells:U-Type Arrangement[J]. International Journal of Hydrogen Energy, 2008, 33(21): 6339-6350 [Article] [CrossRef] [Google Scholar]
  7. Kim N H, Kim D Y, Byun H W, et al. Effect of Inlet Direction on the Refrigerant Distribution in a Parallel Flow Minichannel Heat Exchanger[C]//Proceedings of the ASME 2009 7th International Conference on Nanochannels, Microchannels and Minichannels, 2009: 82051 [Google Scholar]
  8. Jing T T, He G Q, Li W Q, et al. Flow and Thermal Analyses of Regenerative Cooling in Non-Uniform Channels for Combustion Chamber[J]. Applied Thermal Engineering, 2017, 119: 89-97 [Article] [CrossRef] [Google Scholar]
  9. Jiang Y G, Zhang S L, Feng Y, et al. A Control Method for Flow Rate Distribution of Cracked Hydrocarbon Fuel in Parallel Channels[J]. Applied Thermal Engineering, 2016, 105: 531-536 [Article] [CrossRef] [Google Scholar]
  10. Jiang Y G, Chetehouna K, Zhang S L. Sensitivity Analysis of Fluid Properties and Operating Conditions on Flow Distribution in Non-Uniformity Heated Parallel Pipes[J]. Applied Thermal Engineering, 2018, 130: 458-465 (in Chinese) [Article] [CrossRef] [Google Scholar]
  11. Jiang R P, Liu G Z, Zhang X W. Thermal Cracking of Hydrocarbon Aviation Fuels in Regenerative Cooling Microchannels[J]. Energy & Fuels, 2013, 27(5): 2563-2577 [Article] [CrossRef] [Google Scholar]
  12. Wang C C, Yang K S, Tsai J S, et al. Characteristics Flow Distribution in Compact Parallel Flow Heat Exchangers, Part Ⅰ:Typical Inlet Header[J]. Applied Thermal Engineering, 2011, 31(16): 3226-3234 [Article] [CrossRef] [Google Scholar]
  13. Huang C H, Wang C H. The Design of Uniform Tube Flow Rates for Z-Type Compact Parallel Flow Heat Exchaners[J]. International Journal of Heat and Mass Transfer, 2013, 57(2): 608-622 [Article] [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.