Open Access
Issue |
JNWPU
Volume 42, Number 6, December 2024
|
|
---|---|---|
Page(s) | 1071 - 1077 | |
DOI | https://doi.org/10.1051/jnwpu/20244261071 | |
Published online | 03 February 2025 |
- HE Qubo, LIU Haiding, ZHAO Anzhong, et al. Process practice of carbide control in 9Cr18Mo bearing steel[J]. Hot Working Technology, 2018, 47(5): 139–142 (in Chinese) [Google Scholar]
- WANG Shijun, YU Zhimin, YAO Yanshu. Heat treatment technology for eliminatin 9Cr18Mo forging twin[J]. Bearing, 2006(5): 11–13 (in Chinese) [Google Scholar]
- SIQUEIRA J S, ALVES M R D, LUIZ T M, et al. Effect of heat treatment on the chromium-depleted zones of a high carbon martensitic stainless steel[J]. Materials and Corrosion-Werkstoffe Und Korrosion, 2021, 72(11): 1752–1761. [Article] [CrossRef] [Google Scholar]
- WANG Hongxiao. Research on twin carbide in high carbon chromium stainless bearing steel[J]. Special Steel Technology, 2011, 17(4): 9–15 (in Chinese) [Google Scholar]
- Physical and Chemical Laboratory of Wafangdian Bearing Factory. Analysis of the formation reason of twin carbides in 9Cr18 stainless steel and the effect of twin carbides on impact toughness[J]. Physical Testing and Chemical Analysis, 1974(5): 9–17 (in Chinese) [Google Scholar]
- HETZNER D W, VAN GEERTRUYDEN W. Crystallography and metallography of carbides in high alloy steels[J]. Materials Characterization, 2008, 59(7): 825–841. [Article] [CrossRef] [Google Scholar]
- YUAN Zhaojing. Analysis on microstructure and property of domestic G102Cr18Mo steel and imported 440C steel[J]. Heat Treatment of Metals, 2018, 43(3): 71–75 (in Chinese) [Google Scholar]
- KUMAR V, THIRUMURUGAN R, SHANMUGAM. Investigation on microstructural and mechanical properties of sub-zero processed AISI 440C steel[J]. International Journal of Materials Research, 2020, 111(9): 761–770. [Article] [CrossRef] [Google Scholar]
- LI Huidong, ZHANG Qinyi, LIU Wei, et al. Effect of deep cryogenic treatment on microstructure and corrosion resistance of 440C martensitic stainless steel[J]. Heat Treatment of Metals, 2022, 47(8): 152–157 (in Chinese) [Google Scholar]
- YANG J R, YU T H, WANG C H. Martensitic transformations in AISI 440C stainless steel[J]. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2006, 438: 276–280. [Article] [CrossRef] [Google Scholar]
- JIA H, ZHANG J, YI X, et al. Rheological behaviours and constitutive models of 9Cr18Mo stainless steel at high temperature and high strain rate[J]. Iron Steel Vanadium Titanium, 2023, 44(5): 158–166. [Article] [Google Scholar]
- LI Songsong, LI Wei, XIAO Qiang, et al. High temperature deformation behavior of 95Cr18 martensite stainless steel[J]. Journal of Plasticity Engineering, 2023, 30(2): 105–114 (in Chinese) [Google Scholar]
- SAKAI T, BELYAKOV A, KAIBYSHEV R, et al. Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions[J]. Progress in Materials Science, 2014, 60: 130–207. [Article] [CrossRef] [Google Scholar]
- WAN Zhipeng, WANG Tao, SUN Yu. Dynamic softening mechanisms of GH4720Li alloy during hot deformation[J]. Acta Metallurgica Sinica, 2019, 55(2): 213–222 (in Chinese) [Google Scholar]
- TANG Wei, YUAN Wuhua, ZHU Zhifei. High temperature deformation constitutive equation and hot processing map of ultra-high strength steel AF1410[J]. Hot Working Technology, 2017, 46(23): 129–133 (in Chinese) [Google Scholar]
- SELLARS C M, WHITEMAN J A. Recrystallization and grain growth in hot rolling[J]. Metal Science Journal, 1978, 13(3/4): 187–194 [Google Scholar]
- ZENER C, HOLLOMON J H. Effect of strain rate upon plastic flow of steel[J]. Journal of Applied Physics, 1944, 15(1): 22–32. [Article] [NASA ADS] [CrossRef] [Google Scholar]
- LIU Zhiling, REN Shuai, LIU Wei, et al. Hot deformation behavior and microstructure evolution of GH141 nickel-based superalloy[J]. The Chinese Journal of Nonferrous Metals, 2023, 33(8): 2577–2592 (in Chinese) [Google Scholar]
- PRASAD Y. Processing maps: a status report[J]. Journal of Materials Engineering and Performance, 2003, 12(6): 638–645. [Article] [CrossRef] [Google Scholar]
- MURTY S, RAO B N, KASHYAP B P. Development and validation of a processing map for zirconium alloys[J]. Modelling and Simulation in Materials Science and Engineering, 2002, 10(5): 503–520. [Article] [CrossRef] [Google Scholar]
- JALAJA K, MANWATKAR S K, ANAND P, et al. Metallurgical analysis of surface distress on balls during the operation of AISI 440C ball bearings for satellite applications[J]. Engineering Failure Analysis, 2021, 124: 105376. [Article] [CrossRef] [Google Scholar]
- SYARIF J, YOUSUF M H, SAJURI Z, et al. Effect of partial solution treatment temperature on microstructure and tensile properties of 440C martensitic stainless steel[J]. Metals, 2020, 10(5): 14 [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.