Open Access
| Issue |
JNWPU
Volume 43, Number 4, August 2025
|
|
|---|---|---|
| Page(s) | 732 - 740 | |
| DOI | https://doi.org/10.1051/jnwpu/20254340732 | |
| Published online | 08 October 2025 | |
- INOUE TKUROKAWA S. Derivation of path contact and tooth flank modification by minimizing transmission error on face gear[J]. Journal of Advanced Mechanical Design Systems and Manufacturing, 2012, 6(1): 15–22 [Google Scholar]
- INOUE T, KUROKAWA S. Validity of quantifying sensation of fishing reel using transmission error instead of sensory human evaluation for face gear design[J]. Mechanical Engineering Journal, 2019, 6(6): 19–00318 [Google Scholar]
- INOUE T, KUROKAWA S. Characteristics and effectiveness of the face gear with transmission-error-controlled curve considering the path of contact[J]. Journal of Advanced Mechanical Design, Systems, and Manufacturing, 2023, 17(2): 1–13 [Google Scholar]
- LITVIN F L, LU J, TOWNSEND D P, et al. Computerized simulation of meshing of conventional helical involute gears and modification of geometry[J]. Mechanism and Machine Theory, 1999, 34(1): 123–147 [Google Scholar]
- LITVIN F L, FUENTES A. Gear geometry and applied theory[M]. Cambridge: Cambridge University Press, 2004: 83–516 [Google Scholar]
- TSAY M F, FONG Z H. Novel profile modification methodology for moulded face-gear drives[J]. Journal of Mechanical Engineering Science, 2007, 221(6): 715–725 [Google Scholar]
- WANG Yanzhong, WANG Qingying, WU Canhui, et al. Deviation of face gear real tooth surface determined by coordinate measurements[J]. Journal of Mechanical Transmission, 2010, 34(7): 1–4 (in Chinese) [Google Scholar]
- ZHANG Jun, LI Fangfang, WANG Yanzhong. Research on tooth wear testing technology of face gears based on reverse engineering[J]. Journal of Mechanical Transmission, 2022, 46(11): 141–145 (in Chinese) [Google Scholar]
- LI Zhanping, SHEN Yunbo, LIANG Jusheng, et al. Meshing simulation and experiment on digitized tooth surface of face gear[J]. Journal of Xi'an Technological University, 2017, 37(12): 882–887 (in Chinese) [Google Scholar]
- YU Bo, KOU Hanlin, SHI Zhaoyao, et al. A virtual measurement method of the transmission error based on point clouds of the gear[J]. Measurement Science Review, 2022, 22(2): 92–99 [Google Scholar]
- WANG Shenghui, ZHOU Yuansheng, TANG Jinyuan, et al. Digital tooth contact analysis of face gear drives with an accurate measurement model of face gear tooth surface inspected by CMMs[J]. Mechanism and Machine Theory, 2022, 167: 104498 [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.